Like any other above ground pool, maunally with a hose, pole and vacuum, or with an automatic cleaner.
How do I vacuum an above ground doughboy pool?
if you have to ask then you cannot afford it
I have paid for a genuine doughboy pool liner, how can I tell if that is what I received or if I was given a cheaper one for the price of a doughboy? I am having so much trouble trying to get the wrinkles out of it. It seems they are almost manufactured right into it.
Try Doughboy pools on the link below
Liability for resulting damages would rest with the owner of the pool.
I have instructions for various sized doughboy pools...but "gray doughboy pool" doesn't quite narrow it down for me??? If you can be a little more specific in size, dimensions, capacity, etc....or something more specific, I may be able to help you! alii_kai@earthlink.net
In order to vacuumn the pool you must first put in the vacuum and the hose. You can siphon the air out of the hose by putting it in front of the return to dispace all air in the hose line. Then turn off the pump. Insert the end of the vacuum line either into the port at the bottom of the skimmer in the pool or remove the skimmer basket and insert it in the bottom of the skimmer. Then after the line is secure, turn on the pump motor. Your vacuum should be ready to use (manually) or run automatically if you have an automatic pool cleaner such as an Aquabug. If you have a slimline skimmer there is a port located just below the skimmer door it is used for the vac hose. After connecting the hose you put your skimmer lid down inside of skimmer and then you can turn on pump. By doing it this way you can let skimmer basket catch all large debries. This saves on having to backwash so much.
Any pool vacuum can, including the Polaris.
Doughboy Pool businesses are located in El Cajon, in San Diego County, and in Vista, in North San Diego County, California. These stores specialize in selling and servicing Doughboy above-ground pools and related products.
This can be a very complicated installation even if following the INSTALLATION manual.
A vacuum head that has a brush on the bottom - no wheels.
To turn on the pool vacuum, locate the power switch on the vacuum unit and flip it to the "on" position. Make sure the vacuum is properly connected to the pool's filtration system before turning it on.