If an object is not moving, then the net forces working on it are zero. If there were a non-zero net force, the refrigerator would move in the direction the force was applied.
zero
If you are pushing on the refrigerator and it does not move, the net force acting on the refrigerator is equal in magnitude but opposite in direction to the force you are applying. This means that the static friction force between the refrigerator and the floor is equal to the force you are applying, resulting in no net force and therefore no motion.
A greater force is needed to move a refrigerator compared to a book because the refrigerator has more mass and therefore more inertia to overcome. Additionally, the larger surface area of the refrigerator creates more friction with the floor, requiring more force to start and maintain its motion.
The friction force between the refrigerator and the floor depends on the coefficient of friction between the two surfaces and the force applied to push the fridge. The friction force will act opposite to the direction of motion to prevent the fridge from sliding. It is essential to overcome this friction force to move the refrigerator.
It would require greater force to start a refrigerator moving than a book because the refrigerator has more mass and therefore more inertia to overcome. Inertia is the tendency of an object to resist changes in its state of motion. The greater the mass, the greater the inertia and thus the greater the force needed to overcome it.
no because that is an example of racism and rasism doesnt help anyone
if it is a fixed pulley, itself doesnt move. If it is a rotating pulley, its joint probably doesnt move.
To move about a tree.
To move a refrigerator to clean behind it effectively, start by emptying the contents and unplugging it. Enlist help to carefully slide the refrigerator away from the wall, being mindful of the flooring. Clean the area behind the refrigerator using a vacuum or mop, and then carefully slide the refrigerator back into place.
The output force exerted by a rake must be less than the input force due to energy conservation principles. Some of the input force is used to overcome friction and other resistive forces, resulting in a decrease in the output force available for actual work.
Friction is the force most likely opposing your efforts when you push on a stationary object and it doesn't move. Friction exists between surfaces in contact and resists the motion of objects.
No, it is not true. Friction can still occur even if the object does not move. The force applied may overcome static friction but not cause the object to move due to other factors like weight or surface roughness.