The volume is 6 litres. Remember, a cubic centimetere is 1 ml.
So, 40cm x 30cm x 5cm = 6000 cm3. (6000 cm3 = 6 litres)
Equal parts of 30 volume + 40 volume developers= 35 Volume Developer.
Well, honey, to find the volume of a rectangular box, you just multiply its length, width, and height. So for this box, you'd do 20 cm x 30 cm x 40 cm, which gives you a volume of 24,000 cubic centimeters. Easy peasy lemon squeezy!
To achieve a 30 volume developer solution, you can mix equal parts of a 20 volume developer and a 40 volume developer. This will result in a 30 volume developer solution.
No, you cannot make 30 volume developer out of 40 volume developer. You would need to dilute the 40 volume developer with either distilled water or a lower volume developer to achieve the desired 30 volume strength.
To find the volume of a rectangular box, you multiply its length, width, and height together. In this case, the length is 50 cm, the width is 40 cm, and the height is 30 cm. Therefore, the volume of the rectangular box would be 50 cm x 40 cm x 30 cm = 60,000 cubic centimeters.
To create a 30 volume developer solution with a 40 and 30 volume developer, you can mix equal parts of each developer together. For example, mix 1 part 40 volume developer with 1 part 30 volume developer. This will result in a 35 volume developer solution, which is close to 30 volume. It is important to perform a strand test before using the mixed developer on your hair to ensure it is the desired strength.
Volume = 240*40*1 cubic centimetres = 9600 cc = 9.6 Litres
40 :D
No, you cannot physically change the volume of developer once it has been formulated. The only way to achieve a 30 volume developer is by diluting the 40 volume developer with distilled water or a low-volume developer. However, this may affect the performance of the developer.
Mixing 10 Volume developer and 40 volume developer will never make a 20 volume regardless of how much is mixed. In order to make a 20 volume, equal parts of 10 and 30 volumes will need to be mixed. Mixing 10 and 40 will make 30 volume.
40 :D
To make a 20 volume developer using 10 volume and 30 volume, mix equal parts of each (1 part 10 volume and 1 part 30 volume). This creates a balanced solution that averages out to approximately 20 volume. Alternatively, if you have 10 volume and 40 volume, mix 2 parts of 10 volume with 1 part of 40 volume to achieve the same result. Adjust the ratios to maintain the average desired volume if using different combinations.