As far as we know, Toph was the first and only earthbender to achieve metal bending.
If you want to learn to master any element like on Avatar go to www.4element-tribe.webs.com and you can train for free
Barely reflexible if at all. Steel is a metal that would rather break then bend. Though temperature could easily allow it to bend.
Of course, It's possible. There were many strong earthbenders in the series. Like Toph,for example,she took down many firebenders.
A blacksmith is a person who creates objects from iron or steel by forging the metal; i.e., by using tools to hammer, bend, cut, and otherwise shape it in its non-liquid form. Usually the metal is heated until it glows red or orange as part of the forging process.
it can cut most pieces of metal and anything weaker. It is goof for curves, shapes and circles. if you bend it or cut it in the wrong direction though it is week so it will easily snap
some are some arn't but it is real
A sheet metal brake is useful for a sheet metal machine. You need a brake on the machine that helps to bend the metal into the correct angle that you wish to bend it.
A sheet metal brake is useful for a sheet metal machine. You need a brake on the machine that helps to bend the metal into the correct angle that you wish to bend it.
no it is not
Against the Grain, if you bend with the grain it will split the grains
If you want to learn to master any element like on Avatar go to www.4element-tribe.webs.com and you can train for free
their fakes they use fake metal
because metal is bindable and wood is a solid
The malleability of the metal.
Plastic is far more likely to bend than metal cutlery.
Sheet metal isn't required to bend. It can be cut into smaller pieces, too. Bending sheet metal can be useful if it's used to build different shapes and different products.
This is because of the electrons, (being electrical), are attracting the metal. The bonds in the electrons are very flexible and strong