Cutting a fire door is generally not recommended, as it can compromise its fire-resistance rating and safety features. Fire doors are designed to meet specific standards, and altering their structure may allow smoke and flames to pass through more easily. If modifications are necessary, it's crucial to consult with a professional and ensure compliance with local building codes and fire safety regulations.
All you have to do is to stand in front of it. Then select a Pokemon that knows cut and have it use it. The door will open.
it says cut the door, so go to the door then use cut with a Pokemon that knows cut and the door will open.
Use cut
ahh i was stuck here too for awhile heres what you do friend,get a Pokemon that knows cut and then just walk right up to the door (make sure your facing it) and go to your Pokemon list and click on the Pokemon to use cut and it will cut the dotted door to dust which has a gem for the trade machine.
You could find it in the dotted hole. Remember to bring a Pokemon that knows cut to open the door.
All you have to do is to stand in front of it. Then select a Pokemon that knows cut and have it use it. The door will open.
you use the hm cut on the door to open it
Use the move Cut.
because u have to cut the door to get into it
cut the door
Yes, door cut-off sprinklers can be effective in a fire, as they are designed to activate when the temperature rises due to heat from flames. These sprinklers help to control or extinguish the fire by dispersing water over the affected area. However, their effectiveness depends on proper installation, maintenance, and the specific fire conditions. In general, they can enhance fire safety by limiting fire spread and protecting egress routes.
when there is a fire you go out of the Fire Door.
Cutting 4 inches off the side of a fire door is generally not recommended, as it can compromise the door's fire-resistance rating and safety features. Fire doors are specifically designed and tested to meet certain standards, and altering them may render them ineffective in preventing the spread of fire and smoke. If modifications are necessary, it's best to consult with a fire safety professional or replace the door with one that fits the required specifications.
To put out a grease fire in an oven, turn off the heat and keep the oven door closed to cut off the oxygen supply. Do not open the door until the fire is completely out and the oven has cooled down. Never use water to extinguish a grease fire as it can cause the fire to spread.
When you see the strange entrance, use cut to open it. You MUST fall through the holes in this way: North hole. West hole. East hole. South hole.
use cut on the door then go left then up then rite then down in the holes.
walk up to the entrance and use cut on it. the door will open.