You can determine if you have a bent hub by checking for unusual vibrations or steering issues while driving, especially at higher speeds. Additionally, inspecting the wheel alignment and looking for uneven tire wear can indicate a problem. If the wheel does not sit straight in the wheel well or if it wobbles when spinning, it may suggest a bent hub. A professional mechanic can perform a more thorough inspection if needed.
Marcus Bent's birth name is Marcus Nathan Bent.
Lyriq Bent is 6'.
Spectrum of colora bent into a circle or Square
Marcus Bent was born on May 19, 1978.
Bent Lorentzen was born on February 11, 1935.
if its the hub it self then its a axle change.
If the hub is not just loose it has probably been in an accident and is bent.
Horn ring and/or steering wheel hub is bent.
Take the vehicle to a qualified alignment shop, they will be able to tell you if your control arm is bent.
Jack it up and spin it.
I have a 2003 that sounds like it has a bad rear hub bearing. I plan to change it this week. I'll let you know when I'm done.
Which ever one you think may be bent, Just take it out and roll it on a flat surface. If it is bent bad you will have a engine miss on that cylinder.
No. The most common way to tell if a frame is bent is if the roof is buckled.
Do a compression test.
Take it to an alignment shop.
Any decent alignment shop or place that sells and installs tires can remove the wheel, remove the tire, and check the wheel to see if it is bent. If it is bent very badly, just jacking up that wheel and spinning it by hand, you can see that it is bent.
If it has been removed, you could try placing it flat on a known perfectly flat surface. If it is bent you will be able to rock it slightly. Otherwise, any machine shop could check it and tell you, likely for free.