if you mean the secret place in the first level then its down in the pit you cross over by zipline at the end of the level and to get there you have to stop at the edge where the zipline starts, go to the right, turn around and move backward and hang, find where there is a hole beneath you with a ledge u can drop to and release and then grab and pull yourself up then go down a massive hole on the ladder attached to the wall. If you meant in the mansion then its easy enough to get to, theres a whole bunch of secret places in that game tho
at the very top of the spiral staircase in the cathedral, there is a wall that needs super strength to break. it is past the door that would lead you out (don't open the door). he is in the little hole behind the super strength wall.
yes you can :)
To capture a Roarhide you need to get to the mission "Hunter and Prey" then to capture it, face something yellow (Is a desert), and to capture a pup, make a wall and make it crash into your hand (which is a wall) 3 times and then you capture it. (or should be captured)
Sorry, only Palkia gets this IQ skill, at its highest IQ level :(.
By crawling inside of it.
A Hole in the Wall was created in 1982.
Yes, it is possible to punch a hole in a wall, especially if the wall is made of drywall or plaster. However, punching a hole in a wall can cause damage and may require repair. It is not recommended to intentionally punch a hole in a wall.
Use a good quality cement and push the cement in as far as you can, if it a thru-hole, do the same on the inside, smooth one or both patches flush. If its below ground level apply a "Tar base material" to the patch after the cement dries, this will help in waterproofing the patch.
The hole on the wall was caused by a blunt force impact, likely from something hitting or striking the wall with enough force to create the hole.
there a short cut next to a wall go down that hole and it takes you somewhere cool!
To cover a hole in your wall effectively, you can follow these steps: Clean the area around the hole to remove any debris or loose material. Use a patching compound or spackling paste to fill the hole, smoothing it out with a putty knife. Allow the compound to dry completely according to the manufacturer's instructions. Sand the patched area to make it smooth and level with the surrounding wall. Apply primer and paint to match the rest of the wall.
To make sure they have level platforms when hanging a picture on the wall they can use either a traditional level that has a water bubble inside that has to be centered or a laser level that does a red straight line.
To repair a wall hole using wall hole filler, first clean the area around the hole. Apply the filler to the hole, smoothing it out with a putty knife. Let it dry completely before sanding and painting over it for a seamless finish.
Iron Wall - essay - was created in 1923.
The big hole in the wall was caused by a heavy object crashing into it.
The hole is for equalizing air pressure that allows the ink to flow smoothly. Without the hole, a vacuum can form inside the pen, preventing ink from being dispensed properly.