answersLogoWhite

0

There are 5 (2 in front, 1 on top and 2 rear bottom) screws holding the cover plate on the left side of the machine as you stand behind it holding the cover.

Take off the cover, depress the belt tensioner, and remove the old belt. Depress belt tensioner and install the new belt the same way the old one was installed. There is also a diagram on the inside of the cover.

Rich

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How do you replace drive belt on toro 22 rotary mower model no 38435?

A Toro 38435 is a snowthrower manufactured from 1997 to 1999.


How do you replace the auger drive belt on a Toro 521 snowblower?

Got a toro 521 wont blow snow after 2 feet whats up


How do you replace a drive belt on toro LX425 lawn tractor?

One can replace the drive belt on a Toro Lx 425 lawn tractor by reading their owners manual and learning how. A better approach may be to take the lawn tractor to an authorized Toro dealer to be fixed.


How do you replace the drive belt on a toro model 20017 lawnmower?

Before working on the Toro model 20017 lawnmower, disconnect the spark plug. The drive belt is visible under the mover. Use a ratchet to remove the blade. The drive belt is now accessible and can be easily changed.


How do you replace belt on toro snowblower?

put the belt on the bottom pully then on the top engine shaft then put both parts of the belt under the belt tension then the belt tensioner should be on the top of both part (strips) of the belt.


How do you replace a drive belt on a forty two inch TORO mower?

You will need to remove the cutting deck to get to the blades. Here you will find the drive belt, which you just slip off.


How do you replace the drive belt toro xl500 ridding lawn mower?

To replace the drive belt on a Toro XL500 riding lawn mower, first ensure the mower is turned off and disconnect the battery for safety. Remove the deck by detaching the necessary pins and bolts, then take off the old belt from the pulleys. Install the new belt by threading it through the appropriate pulleys, ensuring it is properly aligned. Finally, reattach the deck and reconnect the battery before testing the mower.


What is the fuel capacity on a toro ccr2000 snow blower?

The Toro CCR 2000 snow blower has a fuel capacity of approximately 2.5 quarts (or 0.625 gallons). It is designed for efficient operation, allowing users to clear snow effectively without frequent refueling. Always refer to the owner's manual for specific details and maintenance recommendations.


Toro snow blowers?

I have a toro ccr 1000 snowblower. I need to know the lengh of the drive belt. the belt no. is 71-5381 I've tries a 34'' and a 35" belt. Can you tell me the lengh I need.


How do i change the Drive belt on toro lx 420?

To change the drive belt on a Toro LX 420, first, ensure the mower is turned off and disconnected from the power source. Remove the mower deck by releasing the retaining pins and disconnecting the belt from the engine pulley. Then, locate the drive belt, remove it from the pulleys, and replace it with the new belt, ensuring it is properly routed. Finally, reattach the mower deck and reconnect the power source before testing the mower.


Is there a primer on a toro recycler?

There is a primer on a Toro Recycler. This will have to be drain first then replace the fuel bowl.


How do you remove a spark plug wire on a toro lawn mower?

how to replace plug wire on a toro mower