0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What Influenced the way Albert Ellis thought about therapy?
All answers for A+ <3 EVE from SY!
How do you test an overhead crane?
ZZHZ.COMBefore taking the test running, check that the positive and negative directions of the motors are line with the demands, especially the two motors of the overhead crane traveling mechanism must rotate at the same direction.Begin the test running while the overhead crane is under the safety and normal condition. At the same time, the control handle is at null position. Turn on the knife-type switch and push the starting button of SB1. Connect the circuit and make the overhead crane in the condition ready for running.There are 3 steps for the test running:1. No-load test：The procedures and requirements are the following：1）Make the hoist traveling with no load along the rail 3 times to check no track-slipping of the wheels obviously. The starting and braking conditions are normal; the limit switches act correctly; the buffer in the hoist can collide with the bumper in the bridge structure accurately.2）Hoist with no load test: make the hoist with hook up and down 3 times to make sure that the limit switches of the lifting mechanism act correct and reliable.3）Travel the hoist to the middle point of the span, then travel the crane moving along the rail twice at the lower speed to check the supporting legs and rails. Make the overhead crane traveling at the rated speed roundly 3 times to check the working conditions of the traveling mechanism of overhead crane, no track-slipping of the wheels while starting and braking, travel smoothly, limit switch acting correctly and buffering reliable.2. Static Load Test Running：The procedures and requirements are the following：1）Travel the hoist to the end limit position of the main girder. Mark the center point of the main girder while the overhead crane is stable.2）Travel the hoist to the center part of the main girder to lift the materials at the lowest speed until the rated lifting capacity gradually. Now make the material off 100mm from the ground and suspend 10 minutes. Then measure the down deflection of the center part of the main girder and ensure that it will not exceed 1/750 of the span if the overhead crane working class is A5. Do the same test 3 times and guarantee that there is no residual deformation after unloading at the third test. The interval of each test is not less than 10 minutes.3）After the overhead crane meet the above-mentioned tests, do the test with 1.25 times than the rated lifting capacity. To reduce the influence because of the deformation, travel the overhead crane around the column while doing the static test.3. Dynamic Load Test Running：The procedures and requirements are the following:1）Make the hoist with the rated lifting capacity loading up and loading down repeat and travel the hoist with the rated lifting capacity 3-5 times back and forth along its rail. Finally move the hoist to the center part of the main girder and make the crane travel 2-3 times back and forth at the rated speed along its rail, meanwhile do the repeat starting and braking function. In the whole process, all the brakes, limit switches and electrical control components should be reliable, correctly and flexible. No track-slipping for the wheels, normal vibration of the bridge structure, steady traveling and lifting mechanism, and no residual deformation after unloading.2）After the crane meet the above-mentioned tests, do the test with 1.1 times than the rated lifting capacity.Powered by: Zhengzhou Huahzhong Construction Machinery Co. Ltd. (Short for ZZHZ)Address: No.114 Industrial Road, Shangjie District, Zhengzhou City, Henan Province, ChinaTel: +86-371-68000000Mobile/Whatsapp: +86-13676949605
What are the Oranges in no man's land ar answers?
3 Ayesha ran into man’s land when the soldiers were distracted by
Is fabio married?
he's dead Fabio is not dead. Whoever answers these questions needs to get their facts straight.
What is William Harvey 3 main discoveries?
please don't go on this because all of the answers are WRONG that's right I said WRONG
What is Minimum factor of safety for a crane?
3:1
What are the release dates for Frasier - 1993 Crane vs- Crane 3-19?
Frasier - 1993 Crane vs- Crane 3-19 was released on: USA: 9 April 1996
What are the ratings and certificates for Frasier - 1993 Crane vs- Crane 3-19?
Frasier - 1993 Crane vs- Crane 3-19 is rated/received certificates of: Canada:PG (video rating)
What are the answers to the safety film on zwinky?
1.b 2.a 3.c 4.a 5.c glad i could help :]
What is the ISBN of Fergus Crane?
The ISBN of Fergus Crane is 978-0-385-60719-3.
Categories of CPT?
Category 1 Category 2 Category 3
What is Procedure of inspection the eot crane?
1. check the hook without load like safety latch of the hook, Sheave for free of jam, Break& distortion of the hook. 2. Check the wire rope any defects like cuts, Distortion and Lubrication condition. 3. Check the structure of the crane like any cracks. 4. Check safety interlocks & limit switches. 5. Check leakages of the reducers & its abnormal noise. 6. check all the functions of the crane with and without load.
Are Category 3 utp cables are used for ethernet star networks?
A category 3 cable is totally inappropriate for a modern network. You should install at least category 5.A category 3 cable is totally inappropriate for a modern network. You should install at least category 5.A category 3 cable is totally inappropriate for a modern network. You should install at least category 5.A category 3 cable is totally inappropriate for a modern network. You should install at least category 5.
What category was hurricane rita when it made landfall?
Category 3.
What is measured using the Saffir-Simpson scale?
The Saffir-Simpson Scale is an estimate of the power of hurricanes. Their Categories are Category 1, Category 2, Category 3, Category 4, and Category 5. All of them are destructive, especially Category 3 through 5.
What measured using the Saffir-Simpson scale?
The Saffir-Simpson Scale is an estimate of the power of hurricanes. Their Categories are Category 1, Category 2, Category 3, Category 4, and Category 5. All of them are destructive, especially Category 3 through 5.
What category would a hurricane with 120 mph winds be?
A hurricane with sustained winds of 122 mph would be a category 3.
