Claudine Auger is 173 cm.
Pierre Victor Auger died on December 25, 1993 at the age of 94.
Tito Auger was born on 1968-03-03.
Claudine Auger was born on April 26, 1942.
Pierre Victor Auger was born on May 14, 1899.
An auger bit has a screw on the end of a bit with a chisel end. The screw pulls the bit into what is being drilled, it also centers the bit. Most often used in wood, but a post hole bit is also an auger style.
An auger is a drilling device, or a drill bit. An auger is used by constructors for special drilling rigs, to dig holes for deep foundation piles. They are used for constructions too.
How about bit (as in drill bit) or possibly awl.
This is called an auger bit, and is used to drill holes from 1/4 up to 1.5 inches in a standard auger set. ( to cut larger holes it is easier to use a 'hole saw' in your drill. )
An auger is used to drill holes in wood.
You mean an 'auger bit'. The only requirement is to be sharp.
In the most technical sense, a drill is used to penetrate and create a hole, while an auger is used to move material along a path using a helical screw. The process of drilling with a helical bit involves aspects of both: the creation of the hole with the tip of the bit is drilling, while moving the waste material out of the hole along the helical path is augering. Not all drilling involves augering (oil field drilling uses a pump to move the material), and not all augering involves drilling (the auger in a harvester simply moves product to the bin). In practical use, when the helical vane of the drill bit is significantly wider than the drive shaft, people tend to call it an "auger" rather than a "drill", because the assembly looks less like a wood drill bit and more like a transfer auger.
The number stamped on the square tang indicates the bit size.
An auger is a tool which bores holes into wood or into the ground. For example, "The farmer used an auger to find water deep underground".
They used an auger to bore holes in wood. A more sophisticated version that would be used later was called a brace and bit.
to bore holes
Two-fluted and Carbide-tip are some of the different configurations for the Auger Grill Bits. These tip are primarily used on wood and are used in conjunction with the Auger flexi-drill.