Martin Sheen is Charlie Sheen's father
Charlie Sheen is Martin Sheen's son
Martin Sheen is Charlie Sheen's father.
Janet sheen! :)
No charlie sheen is better
It depends on the paint and the manufacturer. Some flats have a slight matte-like sheen, however, in a paint line the matte sheen should have a higher sheen than the flat version, but a lower sheen than the eggshell version.
As long as they are the same base you can do that.
Base paint is also known as flat paint, or flat wall paint, or matt paint and is a latex paint. Flat paint is just that, flat or dull with no sheen at all. Semi-gloss is an enamel that dries very hard and can be found in a low sheen (satin) a medium sheen (semi-gloss) and a high sheen (high gloss) Flat paint is usually used on walls and ceilings where as semi-gloss is used in kitchens, bathrooms, doors an jambs because it helps hold back the inherent moisture in those areas.
Sheen paint for interior walls offers benefits such as easy cleaning, durability, and a subtle shine that can enhance the appearance of the walls.
Just use satin finish paint.
It is water based paint that has no sheen to it and does not clean well. Usually used on ceilings.
The different sheen levels available for paint are flat, eggshell, satin, semi-gloss, and high-gloss. Each level offers a different level of shine and durability.
In paint, sheen refers to the level of gloss or shine on the surface once the paint has dried. It is measured on a scale from flat or matte (no shine) to high gloss (very shiny), with various levels in between, such as eggshell and satin. The sheen affects not only the appearance but also the durability, washability, and how light reflects off the painted surface. Higher sheen levels tend to be more resistant to stains and easier to clean.
I'll assume you mean "matte paint", in which case it is simply a paint which isn't reflective and has no sheen (ie. it isn't shiny) to it.
it is a very dull finish that doesnt reflect much light
Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.
If the paint you are going to coat is completely dried / and cured, and are of the same "sheen" exp. semi-gloss, you should have no problem with the finished job.