0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What temp and time too cook a med steak?
high for temp 5 mins
Where is the shank on a lamb?
the rear legs just above the toe to the shin
Does the mirror ever read ice?
on my 1998 Tahoe the rear view mirror reads the temp and when the temp hits 37 degrees it will flash between the temp and ice
What is a leg of lamb for roasting?
A leg of lamb is the whole leg taken from the rear of the animal, in the UK it is often roasted and served at Sunday lunch for all the family to enjoy. It should not to be confused with the front leg which is known as a shoulder of lamb.
What is the final cooking temperature for meatloaf?
beef should be cooked 145 (med. rare) to 165 (med) for things like meatloaf, you wanna pull the loaf out when it's about 5 degrees below the desired temp.
Can you tell me were the outside temp sensor is?
Under the rear left brake pad
Location of coolant temp sensor on 99 sedan deville?
coolant temp sensor is on the driver side rear cylinder head. If you look straight down upon the rear head you will see the connector plugged straight into it!goodluck.
Where do you put your temp tag if your rear window is tinted?
where the real tag would go
Where is the coolant temp sensor on a 1991 ford 4.9?
The coolant gauge temp sensor is a one wire sensor located on the right rear of the engine block.
Where is outside temp gauge fitted on Peugeot 307 02 plate?
If you refer to the outside temp sensor, it is located inside on right side rear view mirror
Where is the coolant temp sensor on a 96 Cadillac northstar?
It is on the drivers side of the rear cylinder head.
How is air pressure balanced?
Pressure can be balanced with temperature. if you increase pressure u can actually change the state of a substance by changing temperatures. the state at low temp and high pressure is solid, med temp = liquid, and high temp = g... at low pressure and medium temp the state would be gas... thus there is a relationship between the two. you should look at phase change diagrams.
