Want this question answered?
The writers get it.
He has an older brother named Fred. Leslie Phillips has mentioned him in a few news articles, and Fred lives in the retirement home in my town now.
Chynna Phillips is the daughter of Papa John Phillips and Mama Michelle Phillips.
Mackenzie Phillips's birth name is Laura Mackenzie Phillips.
Nancie Phillips's birth name is Nancy C. Phillips.
You use a Phillips screw driver on a Philips screw.
The phillips head screw was invented in the 1930's and received its patent in 1936.
That would be a "phillips" heades screw.
Use a Phillips screw driver.
phillips screwdriver
a screwdriver for use with Phillips screws screwdriver - a hand tool for driving screws; has a tip that fits into the head of a screw
it was used to tighten or loosen a screw
Phillips head screwdrivers only work on Phillips head screws--which are ones with an "x" indentation on the head of the screw. A straight screwdriver works on screws with a single line indentation on the head of the screw.
Look at the plastic part right next to the metal key and you will see a very, very, tiny phillips screw. Remove that screw and it will open up. Be sure and use a jewelers type phillips screwdriver to remove it as you will damage the screw unless you have a tiny screwdriver.
The correct bits are called torques bits. Perhaps a 1.5 torques bit would be used to get to the tail light assembly. However, a regular Phillips screw would call for a #2 Phillips screw-driver.
Phillips, or Phillips head, refers to the shape of the screwdriver's tip. It forms an X or a cross at the tip, instead of being straight as in a flat head. Phillips head screws and screwdrivers are less likely to slip while being turned, but it's more important to use the right size to avoid damaging the screw head.
A basic screw driver set suitable for home use contains about six tools. The 6-piece Stanley set is typical, containing two each of 1/4 inch and 3/16 inch flat screw drivers with different lengths, and two Phillips screw drivers with head sizes of 1 point and 2 point.