You mean pressure. That is never per inch or per cm. It needs to be square inches or square centimeters. 1 pound per square inch is 6894.757 newtons per square meter. Pound per inch is a measure of fabric strength. Normally any fabric when subjected to a strength test, a specific widteh is taken (normally 2") the fabric of t" width would give way at a particular load and this is expressed as fabric strength. SInce fabrics are soft and compressible, their trhickness measurement is dicey. and length measurement has no controversy about it. Unlike metals, where strength is measured as lb/square inch, fabri strength is always expressed per unit length.
About 25.4 mm per inch.
1 Newton = 0.2248 lbf = 102 gf, 10 Newtons = 1020 gram-force. 25 mm and one inch are almost the same, ratio = 25.4/25, so this will increase to 1036 gm-force per inch.
An inch of rain implies water one inch deep per surface area. An inch of rain equals 5.61 gallons per yard. An inch of rain equals 27,150 gallons per acre.
idk but i was also wondering how much silicon costs per square inch. or can you even determine that?
kilogram-meter per second.
Multiply newtons per square meter (N/m2) by 0.000145
newtons measure force not mass
psi x 6,895 equals newtons per square meter (N/m2)
You cannot.An ounce per inch is a measure of mass per unit length whereas newtons per metre is a measure of force per unit length. Since mass is not the same as force, there can be no conversion between the two measures.
120- that is pounds per sq inch air pressure.
1kg per sq cm is equal to about 14.2 pounds per sq inch.
There are about 19.8 pounds in 88 newtons. 1 Newton is approximately equal to 0.2248 pounds.
About 25.4 mm per inch.
To convert pounds to newtons, you can use the conversion factor: 1 pound is approximately equal to 4.45 newtons. Therefore, 125 pounds would be approximately equal to 556.25 newtons (125 x 4.45).
2.54cm per inch.
The pressure measured in pascals means the force in newtons per area in square meters. Pascals cannot converted to newtons, because the area is missing. Pascals means pressure and newtons means force.
That is called "pressure". The SI unit for pressure is the Pascal, equal to newtons per square meter.