16.4 oz is equal to 10,000 BTU. For example if using a Coleman one burner stove (for camping or when your power goes out) 10,000 BTU lasts up to 9 hours when u put burner on low and 2-3 hrs if using high level. hope this helps. I've been chking into this cause with last weeks recent nor'easter Albert of CT had no power for 6-1/2 days, and w/Hurricane Irene in Aug, had no power for 5+days. so been doing research so I'll be prepared for the next power outage.
1 cubic foot of natural gas can be burned to generate about 1000 btu of heat. A 105000 btu/hr appliance would therefore require about 105 cubic feet of natural gas per hour; this is 0.1 thousand cubic feet, or 0.1mcf/hr.
Converting propane gas to liquid propane is a state change, not a chemical one. Therefore there is no loss of BTU/liter generated when it is burned.
32 BTU = 24,901.416 foot-pounds.
To convert Cubic Feet to Btu's, multiply by 1,000 1 CF = 1,000 Btu's
972.76 cubic feet.
Burning 1 standard cubic foot of propane produces approximately 2,500 BTU. Therefore, burning 92000 BTU worth of propane would equal approximately 36.8 standard cubic feet of propane. The temperature produced would depend on how efficiently the propane is burned and any heat loss to the surroundings.
Ther are 1,050 BTU in one cubic foot of natural gas.
Roughly, yes. Actually it is slightly more. A cubic foot of natural gas has approximately 1000 btus of heat energy when burned. Figures range as high as 1017 btu/cu.ft. based on the proportions of the mixed gases, primarily methane and propane, which have different heating values. The more propane the more heat in a cubic foot. A generalization made by gas distributors is that a hundred cubic feet [ccf] is equal to one therm [ 100,000 btu] of heat.
One cubic foot of LPG typically contains around 2,500 BTUs of energy. This can vary slightly depending on the composition of the LPG mixture, but 2,500 BTUs is a commonly used estimate for general calculations.
2500 btu per cubic foot of vapor.
The calorific value of a 50-50 mix of propane and butane can vary slightly, but typically ranges from 47,500 to 50,000 British Thermal Units (BTU) per cubic foot.
You can't.....BTU/Hr is a unit of heat input i.e. Energy. Cu. ft./hr is a measure of volume flow rate. >>>>>>>>>>>>>>> If you are talking about Natural Gas divide btu input or output by 1000 for cubic feet of fuel used, propane divide by 2500 btu for cubic feet of vapor used.
The heat content of natural gas is typically measured in British Thermal Units (BTU) per standard cubic foot. The range can vary but it's commonly around 1,000 BTU per cubic foot. When calculating BTU per square foot, you would need to factor in the gas consumption rate to determine the BTU output for a specific area.
Natural gas= 1000 btu per cubic ft, propane =2500 btu per cubic ft and #2 fuel oil = 140,000 btu per gallon. Check the availability & prices in your area and you can figure your answer.
btu of natural gas to btu of propane
90 cubic feet equates to 673.24675 US gallons of liquid propane.
A standard cubic foot of natural gas has 1000 BTU. A Barrel of Oil equivalent has 5800000 BTU. It is 0.000172 BBL per cufic foot of gas.