95 mm = 0.095 m, so 95 mm squared = 0.009 sq m.
Note, when you say 95mm squared I assume you mean a square of side 95mm, this area will be 9025 sq mm, not 95 sq mm.
9.5mm = 0.95cm
Metres squared
3.15m
3500 m = 3.5 kmTo convert from m to km, divide by 1000.
The unit is meters per second squared (m/s2)Meters per second squared, or m/(s2). This should not be interpreted as "the square of a second" but instead as "meters per second, per second."
m sq=mxm=(m/1000)*(m/1000)Km Sq
1 acre = 4046.856 m²
Since squared centimeters is cm^2 then instead of converting it normally from centimeters to meters you would multiply it by 2.
The torque required can be calculated as the force applied multiplied by the distance from the center (lever arm). Convert the force from kg to Newtons (10kg = 98.1N) and the length from millimeters to meters (95mm = 0.095m). The torque required is 9.33 N*m (98.1N * 0.095m).
To convert square meters to square centimeters, you need to multiply by 10,000. So, 28.28 square meters is equal to 282,800 square centimeters.
One (M2) is a measure of Volume, and the other (M) is a measure of Length. You can not convert one measure into the other. Just like you can NOT convert Quarts into Feet.
1 km sq = 1 km * 1 km = 1000 m * 1000 m = 1 000 000 metres sq. So, 10 000 000 metres squared = 10 km squared.
You don't. It's a completely different unit, they are derived from m/s(unit of velocity) and m/s2(unit of acceleration).
4 m squared 1cm sqaured is equal to 0.0001m squared
There are 1000 millimetres in a metre. When you are talking about area (in squared units) the conversion factor gets squared also. Therefore to convert mm sq to m sq, you divide by 1,000,000 (i.e. 1000x1000)
4m squared? Whats M?
1 km = 1000 m → 1 m = 1/1000 km = 0.001 km → 1 m² = 1 m × 1 m = 0.001 km × 0.001 km = 0.000001 km² → 6 m² = 6 × 0.000001 km² = 0.000006 km²