answersLogoWhite

0

No! Under no condition should a wood floor be steamed mopped!

Wood is extremely prone to bubbling, swelling, and warping with exposure to water over time. There are products that state they are safe to use on "sealed" wood. The flaw in that statement is the idea that your entire floor is sealed.

If your floor is a prefinished floor as most are today, each board came separate. As you staple/nail them into place there is a small space left. The tops of the board are polyurethaned but the sides are not. As the steam is pressed into those spaces your floor will be permanently damaged in time.

A site finished floor where you have sanded bare wood and applied the polyurethane in your home has the same issue as above. Once the seasons change the boards begin to shrink in winter causing the polyurethaned to break in between each board. These spaces are not large and you many not be able to easily seem them while walking across. But these steam mops will allow water to make its way between the boards.

Regardless what a product states, do not use these on your floor. Bruce, Armstrong, Hartco, Tarkett, and Thomasville all state they void warranties on a floor that has water damaged caused by seam mops.

Please see attached link.

More Advice:

NO!

Hardwood can swell with the steam from the mop. Even if the top of the boards are polyurethaned the floor is still able to get wet.

As your floor expands and contracts with the humidity in the air, polyurethane will have tiny cracks in between each board. This allows water to make it way onto the floor.

No, a steam mop should never be used on a wood or laminate floor. The steam leaves to much water on the floor, even "sealed" wood flooring. Also, the humidity causes the wood to expand and then retract every time you use it.

Wood and laminate manufactures void your warranty if you do use and damage your floor with a steam mop. Surely a manufacture knows their product best!

NEVER, NEVER use any form of wateror steam to maintain wood flooring. Water and wood don't mix. Would you use a hand held steamer to clean your beautiful dining room wood table or a $ 50,000 Grand Piano? Of course not. Then why would you trust false advertising and use steam or water on your fabulous hardwood flooring? I agree with the other comments shown prior to mine. Please use floor cleaners recommended by the wood flooring mfrs. or finish mfrs. for those floors that are sanded and finished in your home.

I am using a portable steam mop and it works great on hardwood floor.

Yes, water do damage the hardwood floor but you need to use right steamer that do not leave much water on floor after cleaning.

Speaking as a professional contractor, It is very acceptable to use a steamer to clean your floors. Industrial steamers....no, handheld portables, yes. The species of wood doesn't really matter as much as the manufacturer's dedication to quality. A lot of manufacturers use an aluminum oxide coating on their products. Outdated products will use polyurethane but a lot of the newer products are a lot tougher; some weighing in at an astounding 35 year warranty. If i was running a multi million dollar company, I would make sure that my product could withstand such a trivial thing such as water. Companies provide cautionary advice as to go the extra mile; usually not because that the said product will actually do damage.

User Avatar

Wiki User

8y ago

What else can I help you with?

Related Questions

Can you clean wood floors with a steam mop?

No, you cannot clean wood floors with a steam mop. The steam will cause the wood to bubble and will get a mould underneath it.


Can you steam mop a vinyl floor?

The Bissell steam mop can be used to clean a vinyl floor. In fact it can also be used on marble, ceramic, stone, laminate, linoleum and sealed hardwood floors.


Whats the best steam cleaner for hardwood floors?

None. You should not use a steam-cleaner on hardwood floors. Water, and especially steam, can damage wood by swelling it at the seams, and then causing it to crack and split later. Use only cleaners approved for hardwood floors, or a window cleaner containing alcohol, or a vinegar/water solution. Mist it onto the floor or onto the head of a damp (not wet!) sponge mop or swiffer-type mop, then wipe clean.


How do you clean hardwood floors without damaging it?

You can clean hardwood floors without damaging it by first cleaning it like you would clean on tiles. Sweep up the floor for trash and then use a bucket and mop it clean and dry.


How to make a noun sentence with the word mops?

He used two mops to clean the house - one mop for the hardwood floors, and one mop for the linoleum.


Can you steam clean rubber tile floors?

A church has a rubber tile floor that needs serious cleaning. Can I steam mop it?


Why can some steam cleaners be used on tile floors but not on hardwood floors?

because wood and water dont mix! you should never do anything more than DAMP mop hardwood, if its that dirty get on your hands and knees and scrub it


What do you clean your hardwood floors with?

You can clean hardwood floors with a damp mop and a mild hardwood floor cleaner. Avoid using excess water as it can damage the wood. It's also important to sweep or vacuum regularly to remove dirt and debris that can scratch the floors.


How can I effectively bleach hardwood floors?

To effectively bleach hardwood floors, first clean the floors thoroughly to remove any dirt or debris. Next, mix a bleach solution with water in a bucket. Use a mop or sponge to apply the bleach solution to the hardwood floors, making sure to work in small sections. Allow the bleach to sit for a few minutes, then rinse the floors with clean water. Finally, dry the floors completely with a towel or mop. Be sure to wear gloves and work in a well-ventilated area when using bleach.


How can I effectively clean sand from hardwood floors?

To effectively clean sand from hardwood floors, start by sweeping or vacuuming the sand to remove as much as possible. Then, use a damp mop with a mild cleaning solution to gently clean the remaining sand. Be sure to dry the floors thoroughly to prevent any damage to the wood.


What is the best way to clean hardwood floors?

Buy a hardwood cleaner kit. It's an alcohol based cleaner you use with a soft terry cloth. After vacuuming or sweeping, spray on and immediately wipe clean.Never use a steam mop, regardless of the claims of the product, and never use Murphy's Oil Soap since it is mostly vegetable oil and will cause the floor to look dull and will eventually damage it.The best way to clean hardwood floors is with a damp mop. Before mopping, make sure that you have removed all surface dust from the floor. This can be done with a soft broom or lightweight vacuum cleaner. Then, simply mop, rinse and repeat. It is important to remove grit and dirt from hardwood floors. Dirt and grit are the biggest enemies when it comes to scratching or scouring the floor finish.


How to clean hardwood floors after removing carpet?

After removing carpet from hardwood floors, start by sweeping or vacuuming to remove debris. Then, use a hardwood floor cleaner recommended by the manufacturer. Apply the cleaner with a damp mop, working in small sections. Make sure to dry the floors thoroughly to prevent damage.