MU= MW x 24(hrs) x 365days) x PLF/1000
where, PLF=plant load factor
MW= the value of MW for conversion
For example i need to convert 150 MW into MU, if PLF=50% or 0.5. Then,
MU= 150MW x 24(hrs) x 365days) x 0.5/1000 = 657MU
mu ========== mm is for milli meter OK. but mu ? The greek symbol mu is used for the prefix 'micro' So mu m ie micro meter ie 10-6 m Hence mu m is 1000 times smaller than mm
Although several large-scale dams can produce over 1000 MW, an average dam will produce anywhere from 80 MW to 500 MW. An average value for those would probably be about 200 MW.
Molecular weight in carbon.
MW of the invertase= 270,000
Mw/Mn=1 Mono disperse Polymer sample consisting of molecules all of which have the same chain length Mw/Mn>1 Poly disperse Polymer consisting of molecules with the variety of chain length.
In economics, marginal welfare (MW) equals marginal utility (MU) when the additional satisfaction or benefit derived from consuming one more unit of a good or service is equal to the cost or sacrifice required to obtain that unit. This equilibrium point indicates an optimal allocation of resources, where consumers maximize their total utility. When MW = MU, it suggests that resources are being used efficiently, and any deviation would lead to a loss in overall welfare or utility.
In electricity, MU stands for "Measurement Unit" and is used to quantify the amount of electricity consumed or produced. MW stands for "Megawatt" and is a unit of power equal to one million watts. MW is commonly used to measure the capacity of power plants or the amount of electricity being generated or consumed at any given moment.
The amount of alternating current (AC) required to produce 1 MW of direct current (DC) depends on the efficiency of the conversion process. In an ideal scenario with 100% efficiency, the AC power would also be 1 MW. However, due to losses in the conversion process, the AC power input would typically be higher than 1 MW. The exact amount would depend on the efficiency of the conversion system being used.
There is no direct conversion between horsepower (HP) and megawatts (MW) as they are units for measuring different types of power. However, 100 HP is approximately equal to 0.0746 MW.
There is no direct conversion between milliunits (mU) and milliliters (mL) because they are units of different quantities. Milliunits usually refer to measurements of hormones or enzymes, while milliliters measure volume.
In the context of watts, "mW" and "MW" represent different values. "mW" stands for milliwatts, which is one-thousandth of a watt, while "MW" stands for megawatts, which is one million watts. Therefore, a megawatt (MW) is significantly larger and more powerful than a milliwatt (mW) in terms of voltage.
The gravitational force in form of vectors is the Gradient of the Gravitational Potential Energy -GmM/r: F= Del -GmM/r = Del -mu/r = mu/r^2 (R/r )= muR/r^3 = mw^2R where 'R' is the radial vector.
1 μm (micrometer) is equal to 0.000001 meters. To convert from micrometers to meters, you simply divide the length in micrometers by 1,000,000.
MW is the abbreviation for megawatts. mW is the abbreviation for milliwatts.
1 mw = 1000 kw watt = v*a (volt x amp) 1000 watt = 1kw when a machine or device that consumes 1 kw in order to operate does so during 1 hour - then we say 1kwh or 1kw/h. there is no conversion from plain MW to KW/H - the time factor in the MW expression is missing. Hope helps you.
1 unit = 1 kWh.Strange but true :)1 Mu = 1000000 kwhAnswerA 'unit' is short for a 'Board of Trade Unit', a now-defunct British Government organisation that used to govern energy prices. A unit corresponds to one kilowatt hour of energy.A unit or kilowatt hour is the energy consumed, over a period of one hour, at the rate of one kilowatt.
100 mW to W