0
What else can I help you with?
What is the scientific word used for oiling or greasing a machine?
A scientific word used to describe oiling or greasing a machine is lubrication. This is done so as to avoid friction of the machine parts. .
Can you use baby oil on metal... aka shotgun?
You are better off using gun oil, or at least a machine oil like sewing machine oil. Vegetable oil kind of smells, olive oil works better, but these organic oils are not as desirable as gun oil. You can use baby oil in a pinch, for a few months at a time. It is better than nothing, but you should wipe it down and replace it with a decent gun oil when you have a chance.
What is the definition of output and input work?
Work Input- The work done on a machine as the input force acts through the input distance. Work Output - The work done by a machine as the output force acts through the output distance (What the machine does to the object (dependent on the force) to increase the output distance).
If machine A performs work in twice as much time as machine B then machine B will use more what than machine A?
Machine B will use more power.
What does the efficiency of a machine describe?
The efficiency of a machine is: (useful energy that comes out of the machine) divided by (energy put into the machine). It's really handy to know this before you spend a million dollars on a machine, and discover that even though you put enough energy into it to do the job, you're not getting enough out, and the job isn't getting done. Example: You need 100 watts of light dispersed in a room. You buy a 100-watt light bulb, screw it in, turn it on, and nobody in the room can read anything. You lose, because you failed to consider that the efficiency of the type of light bulb you bought is about 35%. That means for every 100 watts of electricity you put into the bulb, you get about 35 watts of light out of it. The other 65 watts of power comes out of the bulb in the form of heat. (Which explains why the air conditioning runs more when the lights are on.) Had you considered the 35% efficiency of the light bulb, and knowing that you needed 100 watts of light, you would have known to buy a bulb rated at (100 / 0.35) = 286 watts.
What are the Machine parts where stiffness is desirable?
sadada
How do you describe Brenton in The Homework Machine?
geek
Describe why a high-efficiency machine is more desirable than a low-efficiency machine?
Efficiency is the ratio of the energy converted into useful work by the machine to the energy supplied to the machine. Certainly it will not be possible to convert all the energy supplied into useful work because of wastage of energy due to so many reasons. So efficiency will be always less than 1. As the efficiency becomes more the loss would become less. Hence it is desirable.
Describe construction of open machine enclosure?
You tell me
What does not describe a typical supporter of a political machine?
Poor
Can you describe computer in five words?
Yes: A computer is a machine.
Why is a high efficiency machine is more desirable than a low efficiency machine?
A high efficiency machine will produce more of what is it that you want with the same power as the low efficiency one. In other words, for a low efficiency machine do as much as a high efficiency one, you have to give it more power (energy).
What is a finite state machine?
Finite State Machine is a model to describe how the internal state of the machine varies due to the corresponding actions. The number of states of the machine are limited as the name suggests.
Describe different kind of fusing machines with figure?
Fusing machine
What are some adjectives that describe a machine and begin with the letter J?
· jumbo
If the input work on a machine is equal to its output work the machine has effciency?
If the input work equals the output work, the machine has 100% efficiency, meaning it is able to convert all the input work into useful output work without any losses. An efficient machine is desirable as it maximizes the output for a given input.
Scientific word used to describe oiling or greasing a machine?
Lubrication is the scientific term used to describe oiling or greasing a machine to reduce friction between moving parts and prevent wear and tear.
