answersLogoWhite

0

You cut the drain line and add a 2" section.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

Are there any problems installing a toilet designed for a 12 inch rough in to a drain that has a 14 inch rough in?

It is not a problem at all. But you will have a 2" gap between the back of the tank and the finished wall.


What are the dimensions required for installing a Toto 10 rough in toilet?

The dimensions required for installing a Toto 10-inch rough-in toilet are typically a minimum of 10 inches from the wall to the center of the drain pipe. This measurement ensures proper alignment and fit for the toilet installation.


What are the best installation tips for a Toto toilet with a 10-inch rough-in measurement?

When installing a Toto toilet with a 10-inch rough-in measurement, make sure to measure the distance from the wall to the center of the drain hole accurately. Use a wax ring for a proper seal between the toilet and the floor. Secure the toilet to the floor with bolts and nuts, and connect the water supply line. Follow the manufacturer's instructions carefully for a successful installation.


What are the building codes for toilet rough in?

10"- 12 "- 14 "


How can you measure the toilet rough-in without having to remove the toilet?

To measure the toilet rough-in without removing the toilet, you can use a tape measure to measure the distance from the wall behind the toilet to the center of the closet bolts at the base of the toilet. This measurement will give you the rough-in measurement, which is typically either 10, 12, or 14 inches.


Where can I find a replacement Square toilet seat 10 inch bolt American Standard Peach colored.?

I found a white square toilet seat with a 10" bolt at PlumbingSupply.com


Who manufactures a Single Piece toilet with a 10 rough-in?

Kohler, American Standard, and Toto just to name a few.


Distance to the center of toilet flange to back wall?

most toilets are set for a 12" inch rough in, that means before sheet rock and against a wood framed wall you would set your toilet flange 12 inches to the center of the flange to the edge of the wall and if you have something in your way like a floor joist or other you can buy a 10" rough in toilet or you can use a offset toilet flange which will offset your drain pipe from your flange to about 2 inches any direction and if you are setting a flange before a concrete floor I would measure 12.5 inches just to be safe from concrete workers etc hitting your pipes.The rough for a toilet can be 10" - 12" and 14"Depending on the type of toilet installed .. for example a wall hung tank normally would be a 14" rough becvause of the 2" slip ell supply from the Douglas vavleCertain Flushometer top spud require less then a back inlet bowl for finish


Standard size of toilet?

Standard height is 15" but you can get comfort height or ADA models which are 17" high. The standard toilet rough in dimension is 12", which means the outlet of the toilet at the floor is 12" from the unfinished wall, but they do make 10" and 14" rough in models. The width really depends on the type of toilet you get but remember International Plumbing Code requires 15" from the center of the toilet to the nearest wall. Hope that helps.


What is the standard distance from toilet to wall?

12 inches from the center of the drain to the back wall behind the tank. Some toilets are 10" rough in. Also should be 18" from side wall to center of toilet if possible.


How can you join your toilet to the drain when the rough in is only two inches?

If you mean from the back wall to the center of the drain. The minimum standard rough in is 10 " - 12". IN ADDITION: This is a construction fault. Either you need to re do the plumbing or move the toilet across until it fits. This type of problem is quite a nasty one to fix.


Which Gerber toilet model sells for 150?

There are many different models but this is the one I could find closet to the $150 price range. GERBER Two Piece Elongated Toilet w/ 10" Rough-In 0021410 White, I hope that helps.