A common unit of pressure is the atmosphere, which is equivalent to 760mmHg and 101.3kPa. Thus, to convert a value from mmHg to kPa, we must divide by 760 mmHg/ATM and multiply by 101.3 kPa/ATM.
In this case:
190 mmHg * (1 ATM / 760 mmHg) * (101.3 kPa / 1 ATM) = 25.3 kPa.
This method of units conversion is called dimensional analysis, whereby a value is multiplied by several conversion factors, canceling out the original unit in order to achieve the desired unit.
How do you convert mm Hg to pascal?Answer1 mm Hg = 133.322 Pa760 mm Hg = atmospheric pressure = 101325 Pa133.322 times 760 mm Hg = 101325 Pa
1 mmHg = 133.3 Pa Take your amount of mmHg and multiply it by 133.3 to get the number of Pascals. Take your amount of Pascals and divide by 133.3 to get the number of mmHg.
760mmHg
"mm Hg" stands for millimetres of mercury. Atmospheric pressure was measured in terms of the height of a column of mercury that it could support and by extension, mm Hg became a unit for measuring pressure.
Slightly above but not by much. 760 mm Hg = 1 ATM . 1 ATM is considered average.
How do you convert mm Hg to pascal?Answer1 mm Hg = 133.322 Pa760 mm Hg = atmospheric pressure = 101325 Pa133.322 times 760 mm Hg = 101325 Pa
To convert millimeters of water (mm H2O) to millimeters of mercury (mm Hg), you can use the conversion factor of 1 mm H2O = 0.73556 mm Hg. Simply multiply the value in mm H2O by 0.73556 to obtain the equivalent value in mm Hg.
A pressure of 340 mmHg is equal to 45.3 kPa (kilopascals). To convert mmHg to kPa, you can use the conversion factor 1 mmHg = 0.133 kPa.
The units for pCO2 are typically expressed in millimeters of mercury (mmHg) or in kilopascals (kPa).
1 atmosphere is equal to 101.325 kilopascals. This conversion factor is commonly used to switch between the two units of pressure measurement.
To convert inches of mercury (in Hg) to millimeters of mercury (mm Hg), you multiply by 25.4. So, 24.9 in Hg * 25.4 mm/in = 632.46 mm Hg.
There are approximately 0.2 atmospheres in 150 mm Hg. To convert from mm Hg to atmospheres, you can use the conversion factor that 1 atm is equal to 760 mm Hg.
1atm is equal to 760mmHg. Therefore, .520atm * 760mmHg/1atm = 395.2mmHg
You are misreading it, it is mm of Hg. This means millimeters of Mercury. It is a way of measuring atmospheric pressure. It can be converted to other units as well such as kPa (kilopascals)
To convert millimeters of mercury (mm Hg) to pascals, you can use the conversion factor of 1 mm Hg 133.322 pascals. Simply multiply the number of millimeters of mercury by 133.322 to get the equivalent pressure in pascals.
To convert 60 mm Hg to Pascal (Pa), you can use the conversion factor: 1 mm Hg = 133.322 Pa. Therefore, 60 mm Hg is equal to 60 x 133.322 = 7999.32 Pa.
According to Boyle's Law, if you double the volume of a gas at constant temperature, the pressure is halved. So, the pressure would decrease to 190 mm Hg when the gas sample is expanded to 800 mL.