Use the "Tenths" scale of inches, or the centimetres and millimetres scale.
A metric ruler is 30 cm in length. This type of ruler is commonly called a metric foot ruler because it is similar in length to a one foot ruler.
It is 2/10 past the one inch mark on a ruler.
You will not find 4.78 inches on a ruler. The graduations for inches are numbered and these are usually subdivided into 10. So 4.78 inches will be a tine fraction short of the eighth division after the 4 inch mark.
what are the smallest units on a metric ruler?
Honey, just look for the little tick mark that says "4" on that ruler of yours. It's not rocket science, just a tiny line on a piece of plastic or metal. If you can't find it, maybe it's time to invest in some reading glasses.
Any old Meter ruler should be fine, 36 inches is about 93 centimetres, just subtract the difference.
find a ruler with decimals.
To find the precision on a ruler, look at the smallest division or marking on the ruler, as this indicates the precision of measurements that can be made using the ruler. For example, if the ruler is marked in millimeters and the smallest division is a millimeter, the precision is 1 millimeter.
Look at a ruler and you'll find out.
It is 113/93. You can simplify the ratio of required.
% rate = 93/112 * 100% = 83.04%
To find what times 3 equals 93, you can divide 93 by 3. Doing the calculation, 93 ÷ 3 = 31. Therefore, 31 times 3 is 93.
Walmart
a ruler no LITERLY
A ruler?
Ruler. you measure with a ruler, yard stick, tape measure, or estimate.
To find how many 7s are in 93, you can divide 93 by 7. When you do this calculation, 93 ÷ 7 equals approximately 13.29. This means there are 13 full 7s in 93, with a remainder.