0
What else can I help you with?
How many us oz in 0.63 US qt?
Ounces are a measure of mass/weight, Quarts are a measure of volume. The two can not be equated unless one knows the density of the substance being measured.If the substance is water then:1 quart = 32 fluid ounces0.66 quart = (0.66 x 32) = 21.12 fluid ounces
How big is 32 cm in inches?
The answer is 130.71 inches (approx.). Inches and centimeters are both units of linear measurement. Inches are used in the imperial system whereas centimeters are used in the metric system. To convert from cm to inches, multiply the cm unit by 0.393701.The answer is 130,7087 inches.
How many fluid ounces in a quart of water?
In the US, 1 quart equates to 32 fluid ounces.
Would you use square inches or square feet to measure the area of a bedroom?
In the US, residential area is almost always measured in square feet. However, sometimes square inches are used when tiling small areas, such as bathroom showers, etc.
How many quarts in 73458 cubic inches?
73,458 cubic inches of water is 1,272 quarts or 318 gallons. (US)
What would be the reading on a US tape measure of 170mm equal in inches?
170/25.4=6.69 inches
What is half of 5 ft on a tape measure?
Half of 5 ft on a tape measure would be 2.5 ft. This is because half of any number is obtained by dividing it by 2. In this case, dividing 5 ft by 2 gives us 2.5 ft. So, half of 5 ft on a tape measure is 2.5 ft.
Where is 2 and two thirds on a tape measure?
Tape measures, or rulers, come in both English and metric varieties, so you should specify whether you are asking about inches or centimeters. Let us imagine that you are asking about inches. Typically, a tape measure divides up the inch into halves, quarters, and eighths. This means that the two thirds point is not actually marked. You can estimate it, however. It is less than three quarters, but more than five eighths.
What can a ruler measure?
Depends what it's ruled in. The usual answer in the US is inches and fractional inches.
How many gallons in 7392 cubic inches?
32 US gallons.
Where do you measure with inches and ounces?
Mainly the US and minor nations.
Is 2.5 ft bigger than 32 in?
No, 2.5 feet is not bigger than 32 inches. In order to solve this problem, you need to convert 2.5 feet into inches or convert 32 inches into feet so we can easily compare the two values. To convert 2.5 feet into inches, we would multiply 2.5 feet by 12 inches per foot because there are 12 inches in one foot. This gives us an answer of 30 inches (2.5 feet * 12 inches per foot = 30 inches). From here, we can compare 30 inches to the given 32 inches and see that 30 inches (2.5 feet) is smaller. To convert 32 inches into feet, we would divide 32 inches by 12 inches per foot because there are 12 inches in one foot. This gives us an answer of approximately 2.67 feet (32 inches / 12 inches per foot = 2.67 feet). Now we can compare 2.67 feet (32 inches) to the given 2.5 feet and see that 2.5 feet is smaller.
For volume how do you convert square inches to gallons?
231 cubic inches == (presumed that you meant cubic inches, which like gallons is a measure of volume, rather than square inches, which is a measure of area) 1 US gallon = 231 Cubic inches (presuming you meant cubic inches, which like gallons is a measure of volume, rather than square inches, which is a measure of area)
What does height measure?
First of you will need a meter to measure the height of your child. You can then compare this height with the average heights of other childer. These can be found on the website of your governement.
32 dry quarts?
A "dry quart" is a measure of volume used only in the USA. -It is listed as 1/32 of a US Bushel and 1/8 of US Peck. - 32 dry quarts is 1 US bushel.
What is standard width of home exterior door in the US?
36 inches at the front door, other doors are usually 32 inches.
Would you measure a car in meters or yards?
Meters/MM in Non US countries, Inches in the US.
