I was shocked when this happened to me - in a panic, I grabbed the Windex and cleaned the floors, then went over them again with the Bona. This seemed to do the trick.
There are many advantages of having bamboo wood floors and there are some disadvantages. There is no actual test proving that bamboo wood floors are better or stronger than wood floors. It really just depends on your personal preference.
NO! It will damage the finish. My matte finish is now shiny in that area.
Yes, the Swiffer Wetjet is effective at cleaning hardwood floors, whether real hardwood, or manufactured wood flooring. Proctor & Gamble, the manufacturer of the Swiffer Wetjet, sells a liquid hardwood floor cleaner that works well to remove surface dirt from the wood floors. The Wetjet works best on floors that have been sealed first, rather than bare wood.
No, you cannot clean wood floors with a steam mop. The steam will cause the wood to bubble and will get a mould underneath it.
The moisture difference between Wood floors and wood sub floors would be 4% Plywood sub floors are about 12 to 13% here in Northern Calif. and the wood flooring is usually from 7-9 % .Now of coarse moisture and RH plays into the picture too. The ocean & lake areas may have a greater % of moisture in their wood sub floors due to greater RH
there are steamers that will remove the wax from floors. you can buy or rent them.
To effectively restore old wood floors with gaps, you can fill the gaps with wood filler or rope caulk, sand the floors to remove any imperfections, and then refinish the floors with a protective sealant to give them a fresh look.
Mrs. Meyers, Bona, and Seventh Generation all provide cleaning materials for hard wood floors. Seventh Generation is even a natural free and clear cleaner for healthier cleaning options.
To refinish wood floors DIY, follow these steps: 1. Clean the floors thoroughly. 2. Sand the floors to remove old finish. 3. Apply wood stain if desired. 4. Apply a clear finish coat. 5. Allow the floors to dry completely before walking on them.
Wood floors are really good to have and can look beautiful , but the only thing about them is that they have to usually be washed on a daily basis to remove any dirt from traffic .
To effectively resurface wood floors, follow these steps: 1. Clean the floors thoroughly. 2. Sand the floors to remove old finish and imperfections. 3. Apply a new finish or stain to protect and enhance the wood. 4. Allow the floors to dry completely before walking on them. 5. Regularly maintain and clean the floors to preserve their appearance.
To refinish wood floors for a fresh and polished look, start by sanding the floors to remove old finish and imperfections. Then, apply a wood stain or finish of your choice, following the manufacturer's instructions. Finally, seal the floors with a protective topcoat to enhance durability and shine.
you build a house from ground up... floors down first, then hang up the cabinets
One way to refinish wood floors without sanding is by using a chemical stripping agent to remove the existing finish, then applying a new finish on top. This method can help restore the appearance of the wood floors without the need for sanding.
It depends on who you get to do the job .I did it myself and it wasnt that hard
To effectively prepare your hardwood floors for refinishing through hardwood sanding, start by thoroughly cleaning the floors to remove any dirt and debris. Next, sand the floors using a drum sander or orbital sander to remove the existing finish and smooth out any imperfections. Make sure to sand in the direction of the wood grain to avoid damaging the floors. After sanding, vacuum and wipe down the floors to remove any dust. Finally, apply a wood stain or finish to protect and enhance the natural beauty of the wood.
I found out that Rubbing alcohol will remove dried latex paint on hard wood floors.