You need to know the density (sometimes referred to as 'specific gravity') of the grease. Grams refer to the mass of product. CC's refer to the Volume of product. Density is Mass per Volume.
Lead has a density of 11.34 g/cc so 20 ml would have a mass of 226.8 g (1 ml = 1 cc) (1 cc means 1 cubic centimeter)
Material density should be given to convert from a mass measure (grams) to a volume measure (cc)
This is not a valid conversion. Cubic centimeters (cc) is a measure of volume. Grams (g), kilograms (kg) and milligrams (mg) are measures of weight or mass.
A 12 fl oz. coke can has 355 cc.
You need to know the cubic inch not hp to convert to cc.
A standard shot of grease typically refers to about 1.5 ounces, which is equivalent to approximately 44.36 cc (cubic centimeters). Since 1 ounce is roughly 29.57 cc, multiplying this by 1.5 gives you the total volume. It's important to note that the exact cc measurement can vary slightly depending on the type of grease and its density.
The element Platinum (Pt) has a density of 21.45 g/cc .1000 g ÷ 21.45 = 46.62 cc.
Conversion: Naptha is 0.75 g / cc or 1.333 cc/g Conversion: 1000 cc = 1 l Conversion: 453.59237 g = 1 pound. Conversion: 2000 pounds = 1 ton 1 ton * 2000 lb/ton * 453.59237 g/lb * 1.333 cc/g * 0.001 l/cc = 1209.579653 liters.
This is not a valid conversion. Cubic centimeters (cc) is a measure of volume. Grams (g), kilograms (kg) and milligrams (mg) are measures of weight or mass.
earth ----- 5.515 g/cc mercury---5.43 g/cc Venus---- -5.24 g/cc mars ------3.94 g/cc That is ALL the terrestrial planets :) if this is fer an assignment good luck
This is not a proper conversion. Cubic centimeters (cc) is a measure of volume. Grams (g), kilograms (kg) and milligrams (mg) are measures of weight or mass.
you need the density of the object in g/ml. Then you multiply the cc by the density and you get mass in g. If it is water, it is 1
Depending on the species, it ranges from 0.35 g/cc to 0.5 g/cc
cc g cc g hajxg;lagc;wdc
None, it just uses axle grease. no dampening at all just springs.
The density of the object can be calculated by dividing the mass (33.6 g) by the volume (14.0 cc). Therefore, the density is 2.4 g/cc.
This is not a proper conversion. Cubic centimeters (cc) is a measure of volume. Grams (g), kilograms (kg) and milligrams (mg) are measures of weight or mass.