42.6 lbs.
44pds
Is the gold 5 gallon pail empty or full? If full, full of what? Okay - 5 gallons 0.264 gallons/liter = 18.9 Liters 1000 cubic centimeters / liter = 18927 cc 19.32 grams per cc == 365670 grams 1000 grams per kg = 365.67 KG 2.2 pounds per kg = 804.5 pounds plus 1/2 pound for the pail = 805 pounds. :-)
A shovel is a spade. A Pail is a Bucket.
a UK pint of water weighs a pound and a quarter.8xpints equal 1 UK gallon.answer 10lbs total weight a UK gallon of water.sand is measured in buckets not weight comparable.reckon equal weights. A UK Gallon is a unit of Volume. A UK Gallon of water weighs very close to 10 Pounds. Anything which is Denser than water, will sink when placed in it. Another way to look at is: Which is Denser; Water or Sand?You know sand sinks in water, therefore an equivalent Volume of Sand must be heavier than the same volume of water. However, the sand particles have quite a bit of air spaces between them , therefore it is possible that a cupful of sand may be almost the same weight as a cupful of water, but what you need to know is the comparable Densities, not the weights or volumes. Sand is definitely Denser than water.
A light-colored bucket would be called a pale pail.
8 lbs should fit in a gallon pail so a 10 gallon pail will hold 80 lbs. So, yeah it should hold. hope that helps.
About 95 pounds.
From personal experience, a 40 lb. bag will fill a five gallon pail heaping and spilling over a bit. So, a five gallon pail will hold approximately 35 pounds of wood pellets flush to the top.
The number of 5-gallon pails in a ton of barley depends on the weight of the barley and the volume of the pail. Barley typically weighs about 48 pounds per bushel, and there are approximately 56 pounds in a bushel, which translates to roughly 2,000 pounds in a ton. A 5-gallon pail can hold about 37.5 pounds of barley when filled. Therefore, there would be approximately 53 pails in a ton of barley (2,000 pounds ÷ 37.5 pounds per pail).
The weight of a pail of water will depend on the volume of water it can hold. On average, water weighs about 8.34 pounds per gallon, so you can calculate the weight of the water by measuring the volume of water in the pail and multiplying it by the weight per gallon.
There are approximately 0.67 cubic feet in a 5-gallon pail.
Fill the 3 gal pail and pour into the 5 gal pail. Refill the 3 gal pail and pour two gallons of it into the 5 gallon pail - filling the 5 gallon pail and leaving 1 gallon in the 3 gallon pail. Dump out the 5 gallon pail and pour the remaining 1 gallon from the 3 gallon pail into the 5 gallon pail. Fill the 3 gallon pail one more time and pour that into the 5 gallon pail with the 1 gallon already in it and you have 4 gallons.
5 gallon
A 5-gallon pail of concrete typically weighs around 100 pounds. This weight can vary depending on the specific type of concrete mix being used.
Depends on the pail, many are different sizes.
Easy. Fill the 7gal pail to the full mark (7 Gallons) with water. Then pour, from the 7 gallon pail, water into each of the 3 gallon pail up to the full mark. The remaining water left in the 7 gallon is 1 gallon. Pour this gallon into the aquarium. Fill the 7 gallon pail with water, again to the full mark, and then add to the aquarium. 1 Gallon + 7 Gallons = 8 Gallons.
You first dump the 5-gallon pail, then fill the 5-gallon pail from the water from the 8-gallon pail. Then you dump the 5-gallon pail again, and you are left with 2 gallons in the 8-gallon pail.