0
What else can I help you with?
How many cubic yards of fill for a 24' by 6' round pool?
To fill in this size pool you'll need 100.5 cubic yards of material. If you mean how many gallons of water to fill the pool, you'd need 20,300 gallons of water to fully fill it.
What can 7000 gallons of water can fill?
US Gallons:26 497.88249 litres26.49788 cubic metres1 617 000 cubic inches935.76389 cubic feet5828.71929 gallons (UK)166.66667 barrels
How many gallons in one unit?
It depends on your water companies measure of 1 unit. In my area 1 unit is equal to 748 gallons of water. so 40 units would be: 40units X 748 gallons = 29,920 gallons of water. Just about the amount of water you would use to fill up an average swimming pool.
How many gallons of water is needed to fill a pool 15' diameter by 42 deep?
Is 42 in inches or feet? I've answered the problem below for inches since that makes more sense for a pool. Volume of pool = area of pool * depth V = pi*r^2 * depth = 3.14*7.5*7.5*3.5 = 618 cubic feet The volume of 1 gallon of water = 0.133680556 cubic feet. Therefore, the # of gallons of water in the pool = 618/0.133680556 = 4623 gallons of water In actually, because of significant digits in the depth and diameter of pool, the answer would be approximately 4600 gallons of water
Will colder night temperatures and warm days cause significant evaporation over a week or would you consider that a leak issue?
Evaporation rates vary with weather conditions. The BEST way to simply determine whether the pool has a leak is called the 'bucket test'. 1) Partially fill a bucket with the pool water and mark or measure the water level in the bucket. 2) mark or measure the water level in the pool(does not have to be the same level as water in bucket) 3)Place the bucket on the top step of the pool and leave for 24 hours (or for as long as you like, but sufficiently long to see a change in water level due to evaporation). The fall in the two water levels, pool and bucket, should be exactly the same (eg: 0.5" drop in pool waterlevel and 0.5" drop in bucket water level). If the water level in the pool has fallen further than has the water level in the bucket, the pool has a leak.
If I have a bucket of water that holds 4 gallons of water and another bucket that holds 7 gallons of water. The buckets have no markings. How can I go to the well and bring back exactly 5 gallons?
Fill the 4 gal bucket and empty it into the 7 gal bucket. Fill the 4 gal bucket and then fill the 7 gal bucket from the 4 gal. This leaves 1 Gallon in the 4 gallon bucket. Empty the 7 gallon bucket and pour the gallon from the 4 gal lbucket into it. Fill the 4 gal bucket and pour it into the 7 gal bucket. You then have 5 gallons in the 7 gallon bucket.
How many buckets of water are needed to fill a tub?
The number of buckets needed to fill a tub depends on the size of both the tub and the buckets. For example, if a standard bathtub holds about 40 gallons of water and a typical bucket holds 5 gallons, you would need approximately 8 buckets to fill the tub. However, this can vary based on the specific dimensions of the tub and bucket used.
How can you use a 3 and 5 gallon bucket to measure out exactly 7 gallons into a third container?
First, fill up the 5 gallon bucket. Then, pour the contents in the 5 gallon bucket into the 3 gallon bucket. This leaves 2 gallons left in the 5 gallon bucket. Pour the 2 gallons into the 3rd container. Now, fill the 5 gallon bucket again and pour the full 5 gallons into the 3rd container. This gives you 7 gallons.
If you had a 5 gallon bucket and a 3 gallon bucket how would you get 4 gallons?
you fill the 3 gallon bucket into the 5 gallon bucket twice 2 *3 6 gallons but the 5 gallon will only overflow once it hits 5 gallons. You get the 1 gallon half in the 3 gallon bucket and dump the water out of the 5 gallon bucket. You pour the 1 gallon left from the 3 gallon bucket into the 5 gallon bucket and then refill the 3 gallon bucket and put the 3 gallons in making 4 gallons.
If you have a bucket that holds 4 gallons of water and a second bucket that holds 7 gallons of water. The buckets have no markings can you go to the well and bring back exactly 5 gallons of water?
Yes, you can measure exactly 5 gallons using the two buckets. First, fill the 7-gallon bucket completely. Then, pour water from the 7-gallon bucket into the 4-gallon bucket until the smaller bucket is full; this will leave you with 3 gallons in the 7-gallon bucket. Next, empty the 4-gallon bucket and pour the 3 gallons from the 7-gallon bucket into it. Finally, fill the 7-gallon bucket again and pour into the 4-gallon bucket until it is full, which will leave you with exactly 5 gallons in the 7-gallon bucket.
If You need 4 gallons but only have 5 gallon and 7 gallon buckets how do you get 4 gallons?
fill the 7 gallon bucket, dump it into the 5 gallon bucket and save the remaining 2 gallons, repeat and you have 4 gallons.
Gasoline tank has a capacity of 18 gallons the tank is one-fourth full the additional number of gallons needed to fill complete is what?
72 gallons is needed to fill the tank.
How many gallons of water will it take to fill a 12 inch diameter cylinder 104702 feet long?
615,142 gallons of water are needed to fill this cylinder.
If you have a five gallon bucket and an eight gallon bucket and you need excactly three gallons of water how do you get it without a measuring cup and water supply unlimited?
-- fill the 8 from the unlimited supply -- fill the 5 from the 8 -- The 8 now has (8 - 5) = 3 gallons in it.
How many gallons of water are needed to fill a hockey rink?
15000 gallons
How much potting soil will fill up a 5 gallon bucket?
Approximately 2.5-3 gallons of potting soil will fill up a 5-gallon bucket, leaving some space at the top for watering and root growth. It is recommended to not fill the bucket entirely to allow for adequate drainage and prevent overflow.
How many gallons of water does it take to fill an aquarium?
Fill a gallon bucket, timing how long it takes to do so. Then fill your hot tub using the same source... example: if you filled the bucket with a hose, then fill the tub using the same hose. Then time how long it takes to fill the tub and divide the time it takes to fill the tub by the time it takes to fill the bucket and then you know how many gallons it is.
