The proper procedure for using a red serum separator tube (SST) involves several key steps. First, ensure the tube is labeled correctly with the patient's information. After drawing the blood, gently invert the tube five times to mix the blood with the clot activator. Allow the tube to sit upright for 30 minutes to facilitate clot formation, then centrifuge it according to the lab's protocol to separate the serum from the clot. Finally, transfer the serum to a labeled storage container for analysis.
A gel tube and an SST (Serum Separator Tube) are often used interchangeably, as they both contain a gel that separates serum from blood cells during centrifugation. However, SST tubes specifically refer to a type of gel tube designed for serum collection, typically containing a clot activator. While all SST tubes are gel tubes, not all gel tubes may be SSTs, as some may be used for different types of tests. Always check the specific lab requirements for the type of tube needed.
Yes, when using a winged infusion set (wing tip), it is recommended to use a clearing tube before drawing a light blue (sodium citrate) tube, SST (serum separator tube), and lavender (EDTA) tube. The clearing tube, typically a non-additive tube, helps to prevent contamination from the winged set and ensures accurate test results. This practice is essential for maintaining the integrity of the samples for coagulation and hematology tests.
what is the sst project for clas10(2010)
lite blue, sst, lavender
SST stands for serum separator tube, the typical marble top tube used to collect many blood samples.
Either an SST or Red-top tube.
An SST tube will contain serum once its been centrifuged. SST stands for serum separator tube. It will separate the serum from the other blood components.
The proper procedure for using a red serum separator tube (SST) involves several key steps. First, ensure the tube is labeled correctly with the patient's information. After drawing the blood, gently invert the tube five times to mix the blood with the clot activator. Allow the tube to sit upright for 30 minutes to facilitate clot formation, then centrifuge it according to the lab's protocol to separate the serum from the clot. Finally, transfer the serum to a labeled storage container for analysis.
The gold or SST (serum separator tube) tube is typically used for prealbumin testing.
SST
RED
Sst tube plasma.. Red tube/with ad
A green or lavender top tube can be used for a uric acid test.
pink
SST
A SST tube, or Serum Separator Tube, is used to collect and separate blood samples for laboratory testing. The tube contains a gel that separates the serum (liquid portion of blood) from the blood cells when the tube is centrifuged, making it easier to analyze the serum for various tests.