0
Depends on the thickness of the pipe wall- there will normally be several layers of weld. A 36 inch pipe may require between 4.8 and 6.6 POUNDS of rod, allowing for a stub of rod that cannot be used. Lincoln Welding has a handy guide to pipeline welding you can read on line.
Wiki User
∙ 7y ago
Add your answer:
Earn +20 pts
If flow through a 10 inch pipe is 722gpm what Is the Volocity in feet?
A pipe that is 10 inch would have the velocity of 2.75 feet. This is 2.75 feet with 722 GPM.
How many gallons of water are in a 1 inch pipe 3264 feet long?
Volume of a 240 foot long 1 inch internal diameter pipe is pi x 240 feet x 1/24 feet x 1/24 feet = approximately 1.31 cubic feet (about 2263 cubic inches).
How much water will one foot of six inch pvc pipe hold?
The formula for this goes like this: radius of the pipe squared (32) x pi (3.1416) x length of pipe (12) = volume (amount of water). So 32 x 3.1416 x 12 = 339.2928 or about 339.3 cubic inches.
What is the resonant frequency of an organ pipe related to?
Pipe lengh. a 32' pipe CCCC would produce a ferquency of about 16hz. a 64' pipe CCCCC, 8hz similarly a 16' CCC, 32hz.
What stronge ss pipe or black pipe?
Carbon Steel pipe is stronger than stainless steel pipe as there is more iron in the carbon steel. However, the application depends on the purpose the pipe is being installed. Stainless is of course capable of being sanitized and therefore can be used for food and pharmaceutical uses. Carbon Steel (black pipe) is stronger and cheaper but not sanitary.
What is the standard in Linear inch tracking in pipe welding?
one inch
How do calculate a welding rods per inch dia in ms pipe welding?
You multiply the number of welds by the diameter of the pipe that those welds are applicable to.
How much prices for welding pipe per dia inch?
How much cost pipeline welding large dimeters pipes per inch /us$
Which tool is used to correct hi- low when preparing a 4 pipe for welding?
The tool used to correct internal hi-low when preparing a 4-in. steel pipe for welding is a four-inch grinder with cutting disc.
Which tool is used to correct internal hi-low when preparing a 4-in steel pipe for welding?
The tool used to correct internal hi-low when preparing a 4-in. steel pipe for welding is a four-inch grinder with cutting disc.
Which tool is used to correct internal 'hi-low' when preparing a 4-in. steel pipe for welding?
The tool used to correct internal hi-low when preparing a 4-in. steel pipe for welding is a four-inch grinder with cutting disc.
What is seam pipe?
The pipe which is formed by seam welding.
What are welding?
1g,2g,5g and 6g in pipe welding
Is pipeline welding the same as pipe fabrication welding?
yes
How many times bigger is a 10 inch pipe than a 8 inch pipe?
Every time! lol Seriously a 10-inch pipe is 5/4 of an 8-inch pipe
What does 5G mean in welding?
5G is a welding position for pipe. The pipe is in a fixed, horizontal position. There is a groove along the circumference of the pipe where the weld is to be made.
How many one inch pipe equals for one four inch pipe for water distribution?
16
