A mil is one thousandth of an inch. Therefore, 55 mils is equal to 55/1000 = 0.055 inches. There are 2.54 centimetres in one inch. Therefore, 0.055 inches is equal to 0.055 x 2.54 = 0.1397 inches.
There is an error above: .055 inches cannot = .1397 inches The correct figures are 55 mils = .055 inches OR .1397 centimeters.
75 mil = 0.075 inches
3,6 inches
2.95 inches Direct Conversion Formula 75 mm* 1 in 25.4 mm = 2.952755906 in
3/4 of an inch = .75 inches.75 inches = 1.905 centimeters
1 inches
1 in = 0.0254 m (exactly) ⇒ 85 in = 85 x 0.0254 m = 2.159 m
There is slightly more than 25 millimetres in an inch, so 75 millimetres = 3 inches approx. <><><><><> Most times, the mil is a unit of thickness in thousandths of an inch, so 75 mil is 0.075 inches thick. Depending on what you are looking at, 75 mil is quite thick. For instance, a typical plastic garbage bag might only be 1 or 2 mils thick.
3/32"
- mils are a unit of measure - 1 mil is 1/1000 of an inch thick - 75 mils is 75/1000 of an inch, or .075 inch
1 mil is equal to .001 inches
.07"
30 mil = 0.03 inches
1/8
0.1 inch
A "mil" is a 1/1000 of an inch. So 6 mil is equal to 0.006 inches.
A 4 mil thickness is four thousandths (0.004) of an inch.
A 16 mil piece of plastic is as thick as 0.04 centimeters. 16 mil would equal 0.016 inches. As you can see, this piece of plastic would not be very thick.
Yes It is 250 mil= 25 cm which is approximately 9 inches