the pitch gets higher as you tighten
When it is on the guitar, the vibrating string makes the guitar vibrate with it.
check my answer
Well the strings do the vibrating. But those vibrations are transferred through the saddle and bridge (the parts that connect the strings to the body) into the body wood which creates the acoustics and amplify the sound. It is then expelled through the sound hole in the front.If you're using an electric guitar the pickups directly under each string will pickup the sounds and transform that into an electrical signal that sounds like a guitar or whatever effect you're using.All of it, but principally the strings and the box (which responds in resonance with the vibrations of the strings).
Nothing, as it won't go anywhere. Only a taut string can transfer vibrations
soft
The sound is produced by the vibration of the string.
you can tighten or loosen your strings, causing the string make higher or lower sound. (Check guitar tuning)
The strings.
To mute a guitar string effectively, lightly rest your fretting hand fingers on the string without pressing down to produce a clear note. This technique helps to stop unwanted string vibrations and produce a clean sound.
The thinnest string on a guitar is usually the high E string. Its purpose in playing music is to produce the highest pitch notes, adding brightness and variety to the sound of the guitar.
When you pluck a string on an electric guitar that is plugged in to an amplifier, the pick-ups underneath the strings "hear" the sound, and send it through to the amplifier, projecting the sound of the string plucked.
The lowest note on a guitar is the low E string, which is the thickest string on the instrument. It is played by plucking the string with either a pick or fingers to produce a deep, resonant sound.
To produce a clear E note sound on the guitar, place your index finger on the first fret of the third string (G string) and strum that string without touching any other strings. Adjust your finger position and strumming technique until you achieve a clear and resonant E note sound.
The guitar makes sound when you pluck a string. The string vibrates down to the base of the guitar and travels in the hole, coming out as a sound we call a note.
the larger the amplitude at which something vibrates = the louder the sound. so by plucking a string harder, you're increasing the amplitude of the sound waves and thus increasing the sound volume
From what I understand the space and other qualities cause the pitch. So depending on how much space the instrument is set at changes the pitch. Let's say you loosen a guitar string the pitch is flatter because the string has more space to make the sound waves. If you tighten the same string it will be sharper because the string has less space to make the sound wave.
A 12-string guitar works by having six pairs of strings, with each pair tuned to the same note but one octave apart. When played, these paired strings vibrate together, creating a fuller and richer sound compared to a traditional 6-string guitar. This unique sound is achieved by the doubling of each note, creating a chorus-like effect that is characteristic of the 12-string guitar.