In value, yes. The extra zero on the end indicates a higher degree of precision. For example, 5.4 could really be 5.39, 5.43, 5.44, 5.36, etc. rounded to 5.4. That is because 5.4 has precision only to the tenths place so its error can be +/- 4 hundredths. However, 5.40 could only be off by 4 thousandths of an inch (5.403, 5.404, etc.), which makes 5.40 much more accurate than 5.4.
In the metric system all lengths are measured in metres. Unlike the imperial system where 12 inches make a foot, 3 feet make a yard, and inch foot and yard are separate units.
This means that every distance is quoted as a number of metres, eg an olympic swimming pool is 50 metres long. When the distance is smaller than a metre, we use a prefix to show what fraction of a metre is being used. For instance an A4 sheet of paper is 0.297 metres long and 0.210 metres wide, to make this easier to write (and say) we quote the length as thousandths of a metre; 0.297 metres is 297 thousandths of a metre.
Because the metric system is international and isn't restricted to English speaking nations, there is a system of prefixes that indicate what fraction of a metre is being used. The prefix for thousandths is milli-, so 0.297 metres is 297 millimetres, although we say millimetres the measurement is still in metres we're just quoting thousandths of a metre.
The prefix centi- indicates hundredths , so 1 centimetre is 0.01 metres. This means that 5 metres and 28 centimetres is 5 metres and 28 hundredths of a metre, which is 5.28 metres.
Because all measurements are in metres saying 5 metres and 28 centimetres is incorrect, the distance is simply 5.28 metres, you wouldn't say 5 miles and one half of a mile, you'd say 5 and a half miles.
5.28m
28 centimeters = 11.023622 inches.
4.3 centimeters=43 millimeters
The answer is 71.12 cm (approx.). Inches and centimeters are both units of linear measurement. Inches are used in the imperial system whereas centimeters are used in the metric system. To convert from inches to cm, multiply the inch unit by 2.54.
CM (metric) converts to inches (Standard) at a 1: 25/64 ratio. That being said 28 inches translated into CM is 71.12. Several freely available calculators can assist with such conversions and are easily found.
1000 millimeters = 1 meter 28 mm move the decimal point 3 units to the left 28 mm = 0.028 m
528 equals 37,252,902,984,619,140,625
28 centimeters is 280 millimeters.
28 centimeters is equal to about 11 inches.
5.28 metres = 528 centimetres.
2.8
12
280 millimeters.
Yes, that is correct.
There are 91.44 centimetres in one yard. Therefore, 28 yards is equal to 28 x 91.44 = 2560.32 centimetres.
2.8 centimeters1 centimeter = 10 millimeters28 millimeters * 1 centimeter/10 millimeters = 2.8 centimeters
1 km = 105cm so 28km = 2800000cm
There are 10 centimetres in one decimetre. Therefore, 28 decimetres is equal to 28 x 10 = 280 centimetres.