answersLogoWhite

0

lowpowerobjective

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about General Science

What lens is used to locate the specimen?

fartlick is your new name


When you see a specimen clearly down a microscope it is in?

When you see a specimen clearly down a microscope, it is in focus. Achieving focus involves adjusting the distance between the specimen and the objective lens to ensure that the light rays from the specimen converge at the focal point of the lens. This allows for a sharp image to be formed on the eyepiece or camera sensor, enabling detailed observation and analysis of the specimen.


What is the correct microscope procedures?

Which of the following is a correct procedure for the operation of a microscope? First, put the specimen into focus using a low power lens, then switch to a lower power lens if needed.Remove and add slides while the high power lens is selected.First, put the specimen into focus using a low power lens, then switch to a higher power lens if needed.Use the fine focus knob with the low power lens and use the coarse focus knob with the high power lens


What is a cylindrically shaped attachment on the revolving nose piece of a compound light microscope near the specimen?

The objective lens magnifies the specimen, producing a real image that is then magnified by the ocular lens resulting in the final image; The total magnification can be calculated by multiplying the objective lens value by the ocular lens value


What is the correct procedure for the operation of a microscope?

First put the specimen into focus using a low power lens, then switch to a higher power lens if needed.

Related Questions

Lens used to locate specimen on a microscope?

The lens used to locate a specimen on a microscope is typically the lowest magnification lens, known as the scanning lens or low power objective. This lens provides a wide field of view, making it easier to find and center the specimen before switching to higher magnification lenses for detailed viewing.


What lens is used to locate the specimen?

fartlick is your new name


What lens on a microscope are used to locate the specimen?

To locate a specimen on a microscope, the low power objective lens is typically used, often a 4x or 10x magnification. This lens provides a wider field of view, making it easier to scan the slide and find the specimen. Once located, higher power objective lenses can be used for more detailed observation.


What lens uses to locate the specimen?

Convex lens or low power objective


What objective lens is it easiest to find or locate your specimen?

You should use the lowest value lens. It is the shortest one.


What is the objective lens used to locate the specimen and the first focus?

When viewing a specimen, you must always use the lower power objective lenses first. Low power lens gives the widest field of view and makes it easier to find the specimen when you look through the microscope. Finding the specimen at high power, without first centering it in the field of view at low power, is nearly impossible.


WHere are two lenses locate do in a compound microscope used in most classrooms today?

In most classrooms today, a compound microscope typically has two lenses located within the eyepiece and the objective. The eyepiece lens (or ocular lens) is located at the top of the microscope and is used to view the magnified image of the specimen. The objective lens is located near the specimen and is responsible for magnifying the image of the specimen before it reaches the eyepiece.


What is the lens used to locate the specimen on the Microscope And yes Im working on the crossword ws?

im working on the same worksheet too, its lowpowerobjective :D


When viewing a specimen under the microscope you should always start with the?

low power objective lens to locate and focus on the specimen before moving to higher magnifications.


What observe lens should be used when you first look at a specimen under the microscope?

When first examining a specimen under a microscope, you should start with the lowest power objective lens, typically the 4x or 10x lens. This allows for a broader field of view, making it easier to locate the specimen. Once the specimen is in focus, you can then switch to higher power lenses for more detailed observation. Always ensure to adjust the stage and focus carefully to avoid damaging the slides or lenses.


Which objective is always used to first locate an object on a microscope and explain why?

The low-power objective lens (usually 4x) is always used first to locate an object on a microscope. This objective lens provides a wider field of view and a lower magnification, making it easier to find and center the specimen before moving to higher magnifications.


What lens do you use to locate the specimen on a microscope?

To locate a specimen on a microscope, you typically start with the low-power objective lens, usually 4x or 10x. This magnification provides a broader field of view, making it easier to find the specimen. Once located, you can switch to a higher power objective lens for more detailed observation. Always ensure to use the coarse focus knob with low power and the fine focus knob with higher magnifications for clarity.