0
Setup time is the minimum amount of time the data signal should be held steady before the clock event so that the data are reliably sampled by the clock.
Or
the minimum time before which data must be stable before clock transition.
Hold time is the minimum amount of time the data signal should be held steady after the clock event so that the data are reliably sampled.
Or
the minimum time after which data must be stable after clock transition.
These are the times during which the data input must be stable.
What else can I help you with?
What is experimental setup?
were you setup your own experiment
2 kinds of setup in an experiment?
control and experimental setup
In a properly designed experiment how many mainpulated responding and controlled variables should you have why?
In a properly designed experiment, it is important to have at least 2 controlled variables. With two variables you are able to remove one at a time and see the effect in your setup.
What does retain mean in science?
to hold onto a characteristic through time
What is the purpose of a control setup in an experiment?
A control setup is something where you know how it will behave. It gives you a reference to measure affect of all other variables.
How do you avoid setup and hold time violations?
To avoid setup time violations:The combinational logic between the flip-flops should be optimized to get minimum delay.Redesign the flip-flops to get lesser setup time.Tweak launch flip-flop to have better slew at the clock pin, this will make launch flip-flop to be fast there by helping fixing setup violations.Play with clock skew (useful skews).To avoid hold time violations:By adding delays (using buffers).One can add lockup-latches (in cases where the hold time requirement is very huge, basically to avoid data slip).
Is squid a web browser cache?
It is a proxy. But can be setup to cache a set amound of data. For instance you can setup the cache to hold 500Mb. And if you goto Google it wont have to load the images every time...
Technically squid is a web browser cache?
It is a proxy. But can be setup to cache a set amound of data. For instance you can setup the cache to hold 500Mb. And if you goto Google it wont have to load the images every time...
How do you setup an IBM 3196?
Hold Down the space bar while powering up the terminal, then you can setup the address etc on it.
What is meant by setup time?
The setup time is the time that the data inputs must be valid before the clock transition.
What is the difference between flipflop setup time and hold time?
Set up time is the amount of time before the clock edge that the input signal needs to be stable to guarantee it is accepted properly on the clock edge. Hold time is the amount of time after the clock edge that same input signal has to be held before changing it to make sure it is sensed properly at the clock edge. Whenever there are setup and hold time violations in any flip-flop, it enters a state where its output is unpredictable: this state is known as metastable state (quasi stable state); at the end of metastable state, the flip-flop settles down to either '1' or '0'. This whole process is known as metastability
How do you use the menu button on the GE universal remote?
hold the setup button for a second, then click the button labeled menu. If you hold the setup button too long the light will stay on and expect a code for reprogramming, so don't do that.
What kind of server is used to hold the setup files on a windows CD or DVD on the network and then at each PC you can execute the setup program on the server?
distribution Sever
Which backup site would require NO setup time at the occurrence of an emergency Which backup site would require NO setup time at the occurrence of an emergency Which backup site would require NO setup?
Mirrored
What are the cost drivers which are used in apportioning overheads cost under activity based budgeting?
Cost drivers are activities due to which cost incurred for expample as many time as machines are setup for production as many time machine setup cost will be incurred so matchine setup is cost driver.
WHAT account setup if you do not have time to finish an account setup task what can you do to save your work?
Click the File for Later button
During account setup if you do not have time to finish an account setup task what can you do to save your work?
Click the File for Later button
