Steps and procedures to make a tee joint?

Answer 1

This is how to join two cables In electrical engineering Field.

Firstly, get the cables (One will act as main while the other one will act branch cable) and make sure they have the qualities a good conductor must have. About 5 inches of the main cable should be bared using plier and same applies to the branch cable. The exposed branch ( after the removal of the insulator that cover the wire) must be divided and made to form a 'Y' shape, so as to form a two flat strips. The strips are then wrapped round the main cables in opposite directions. That is just the simple steps involved in making T joint

I hope this helps?

Thanks for reading.

T.L

Answer 2

To make a tee joint in welding or metalworking, you first need to prepare the materials by cutting them to the desired lengths. Next, you will need to ensure that the pieces are properly aligned at a 90-degree angle to form the tee shape. Then, you can tack weld the pieces together to hold them in place before completing the full weld along the joint. Finally, you should grind down the weld bead to achieve a smooth and seamless finish.

Answer 3

1.First get two pieces of pipes (both about 6 inches in length).

2. On one of the pipes cut a hole the size of the circumference so of the pipe ( try heating a knife to cut pipe).

3. Fit the other piece of pipe lengthwise into the hole you've made in the other and paste for a secure bond.

4. Let paste dry.... and 'Viola'-- you've got a tee joint!