Latitude
The vertical distance that can be accommodated for normal operation, the distance from the top of the bed to the bottom.
If you're talking about the thinnest layer of the atmosphere, then it is the EXOSPHERE..
the distance between two consecutive compressions or rarefactions of a light wave is called its wavelength.
Rotation
if you are talking about the distance from start to finish, then you can't have an answer because nobody knows. It goes on into space. If you are talking about the distance from the Earth, then it is about 500km...
The vertical distance from the top of a wave to the bottom of a wave is called the amplitude.
The earth is round, due to gravity, so there are no flat bits at the top and bottom.
Pole
The Earth's top and bottom are defined by the North and South poles, respectively. The concept of top and bottom is based on human perception, as Earth is a sphere with no true top or bottom in space.
The icy areas at the top and bottom of the Earth are called the Arctic (at the North Pole) and the Antarctic (at the South Pole).
The distance between the top and bottom of a wave in the ocean is called the wave height. Wave height can vary depending on the strength of the wave and environmental factors, but it is typically measured from the trough (bottom) to the crest (top) of the wave.
aprox 4225.32 miles mars is about 58 percent smaller than earth.
The gap between bottom bed and top bed of the press is called the shut height of the press, or the distance between top of the top plate and bottom of th bottom plate in presstool .it is called as the shut height of the press tool
The half perpendicular distance from the top of the crest to the bottom of the trough is called the amplitude. It represents the maximum displacement of a wave from its equilibrium position.
The distance from the North Pole to the South Pole, which could be considered from the "top" of the world to the "bottom," is approximately 12,430 miles (20,000 kilometers) if measured along the Earth's surface.
The distance a piston travels within the cylinder is called the stroke. It is the distance between the top dead center (TDC) and the bottom dead center (BDC) positions of the piston.
It is called travel. Travel is the measure of distance from the bottom of the suspension stroke to the top of the suspension stroke.