What are the 3 classes of levers?

Answer 1

Levers are classified into three types (first-class, second-class, and third-class) depending on the relative position of the fulcrum (pivot point), the point of applied (input) force, and the location of the load (output force). In a first-class lever, the fulcrum is between the input force and the output force, and the load is moved in the opposite direction of the applied force. Placing the fulcrum closer to the load gives an advantage of force (less force needed to move the load a shorter distance), while a fulcrum closer to the point of applied force gives an advantage of distance (the load is moved a greater distance but more applied force is needed). First-class levers include a crowbar, using a hammer's claw end to remove a nail, and a pair of scissors. In a second-class lever, the load is between the fulcrum and the point of applied force, so both forces move in the same direction. Less force is needed to move the load, but the load does not move as far as the direction over which the input force must be applied. Examples include the wheelbarrow, a bottle opener, and a door on its hinges. In a third-class lever, the input force is applied between the fulcrum and the load, and both move in the same direction. The amount of applied force is always greater than the output force of the load, but the load is moved a greater distance than that over which the input force is applied. Examples include a hammer driving a nail and the forearm of a person swinging a Baseball bat. If you want to find out any more, go to: http://www.technologystudent.com/forcmom/lever1.htm :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :)

Answer 2

first class

second class

third class