A 35 gallon drum is equivalent to 132.49 liters. Which is also equivalent to 4,448 ounces, most commonly 280 pounds.
The ribs add strength to the sides of the drum. They also make the drum easier to roll along the ground.
One gallon of paint weighs approximately 8.33 pounds. Therefore 55 gallons would weigh 458.15 pounds. Factoring in a weight of 25 pounds for the drum, the total would be about 483.15 pounds.
1 gallon = 128 fluid ounces 1/50 of a gallon = 2.56 fluid ounces
50 gallon
The drum has a capacity of 55 gallons. We have no way of knowing how many gallons are actually in it at any particular time. For all we know, it may be empty, and you may be just trying to trick us.
A standard 44-gallon drum typically has dimensions of approximately 23 inches in diameter and 34 inches in height. These dimensions can vary slightly depending on the manufacturer and the specific design of the drum.
The dimensions for a 20 gallon drum is 21.75 inches high, 18.25 inches inside diameter, and 18.75 inches outside diameter. It can accommodate a load of 199 pounds.
There are exactly 231 in3 in a 50 gallon drum, which is also equal to roughly 3,785 cm3.
An empty 50-gallon metal drum typically weighs around 30-40 pounds, depending on the thickness of the metal used in its construction.
The drum should measure 23 inches diameter 36 inches height These are all external measurements.
The diameter of a standard 30-gallon drum is typically about 22.5 inches (57.15 cm). However, dimensions can vary slightly depending on the manufacturer or specific design of the drum. It's important to check the specifications for the particular drum in question for precise measurements.
You pour four gallons into the five gallon drum, and take the ten gallon drum with the other four gallons of oil in that.
Dimensions are 970mm high by 580mm diameter
The dimensions of a 50-gallon plastic barrel can vary depending on the specific design and manufacturer. However, on average, a typical 50-gallon plastic barrel may have dimensions around 22-24 inches in diameter and 35-38 inches in height.
To calculate the surface area of a 55-gallon drum, we first need to determine the dimensions of the drum. A standard 55-gallon drum typically has a diameter of 22.5 inches and a height of 33.5 inches. The surface area of a cylinder can be calculated using the formula 2πr² + 2πrh, where r is the radius and h is the height of the cylinder. Plugging in the values for the radius and height of the drum, we can calculate the surface area in square inches.
Inside height is 32.8 inches for closed top barrel and 32.5 inches for open top barrel. Search "55-gallon-drum-dimensions.html" for all dimensions.
Fill the 5-gallon drum. Pour the contents into the 3-gallon drum, filling it. Now you have 2 gallons left in the big one.Empty the 3-gallon drum. Pour the 2 gallons into it. At this point there is room for one more gallon.Now refill the 5-gallon drum and pour off as much as it takes to fill up the small one. That means you are removing one gallon.Now you have exactly 4 gallons in the 5-gallon drum.or Fill the 3 gallon drum. Pour the contents into the 5 gallon drum. Refill the the 3 gallon drum and pour the contents into the 5 gallon drum until it is full. Empty the 5 gallon drum. You have 1 gallon left in the 3 gallon drum. Pour the remaining 1 gallon into the 5 gallon drum. Re-fill the 3-gallon drum and pour that into the 5 gallon drum giving you 4 gallons. or Tip the 5 gallon drum and fill it until water is level to both the bottom and spilling out the top; next do the same with the 3 gallon drum; then pour the half full 3 gallon drum into the half full 5 gallon drum, rusulting in 2.5 plus 1.5 equals 4 gallons! orWatch Die Hard 3 for the answer.