An inch can be divided into quarters, eighths, sixteenths, thirtyseconds and sixtyfourths, or it can be divded into tenths, hundredths and thousandths. A distance of 0.001 inch is described as a 'thou'.
They vary. Usually they are 1/10 inch divisions but 1/8 used to be quite common but I have not seen any for some time. 1/16 inches is still reasonably common and precision rulers or tape measures may have 1/32 inch divisions.
1/32,1/16,3/32,1/8,5/32, 3/16,7/32, 1/4, 9/32, 5/16,11/32,3/8,13/32,7/16,15/32,1/2,17/32, 5/8, 19/32, 10/16, 21/32, 3/4, 23/32, 11/16, 25/32, etc
Inches can be divided in many ways. If you look at a typical school ruler you will see 8ths, 10ths,12ths and 16ths.
To find the half of any numerical Digit we need to do the division of number by 2. Here, the number is given as 5712 inches . Half of 5712 inches is 5712 /2 is 28 56 inches.
12 inches per foot = 446/12 = 37.1667 feet.
1 inch equals to 2.54 cm.Hence 5.3 inches equals to 13.462 cm.
You will not find 4.78 inches on a ruler. The graduations for inches are numbered and these are usually subdivided into 10. So 4.78 inches will be a tine fraction short of the eighth division after the 4 inch mark.
Divide that by 2.54 to convert it to inches. Then divide the inches by 12 (integer division, i.e., with remainder), to convert that to feet and inches.
cubic inches x 0.0163871 = liters
To convert from mm to inches, divide by 25.4. From there, you can divide by 12 (division with remainder), to convert to feet and inches.
By division and so 4/5 = 0.8 inches
Divide the inches by 12 (integer division). The integer result is the number of feet. The remainder is the number of inches.
The inches need to be divided into tenths on the tape Then its 2 inches + 1 sub division (1/10)
Division by a number is the same as multiplication by its reciprocal (or inverse). So, division by a half is the same as multiplication by 1/half or two. Thus, the answer is 432 / (1/2) = 432*2 = 864
That depends a lot, 159 of what you want to convert. If you mean 159 inches, divide by 12. The integral part will be the feet, the remainder of the division is the inches.
1) Divide inches by 12 to convert to feet. Use integer division; any remainder will remain as inches. 2) Divide the feet by 12, to convert to yards. Once again, use integer division; any remainder will remain as feet.
Inches are divided into 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, and more.
To find the half of any numerical Digit we need to do the division of number by 2. Here, the number is given as 5712 inches . Half of 5712 inches is 5712 /2 is 28 56 inches.
division namely divide by 12 example 36 inches / 12 = 3 feet
There are 2.540 cm/inch and (exactly) 12 inches per foot. Therefore, 164.1 cm = 164.1/2.540 = 64.61 inches. division of this number by 12 yields 5 feet with a remainder of 4.61 inches, which is the required answer.