0
What else can I help you with?
What are Two kinds of flame?
the yellow/safety flame - thats the one that burns less the blue flame - burns THE ROARING FLAME - that one burns a lot and you can tell the difference from the blue flame because it makes a roaring sound
What type of a flame is best to use?
if you are talking about what flame to use on a Bunsen burner than the yellow flame is to make sure that everyone knows that there is a flame but the blue flame (less visible) is used as the hotter flame and the better one.
Is flame an abstract noun?
No, the noun flame is usually a concrete noun, a word for a thing that can be seen, touched, sometimes smelled, and even measured for size and temperature; a flame is a physical thing. The noun flame is sometimes used in an abstract context, for example to refer to an 'old flame', or the 'flame of desire'. The word flame is also a verb (flame, flames, flaming, flamed).
How do you increase the temperature of a yellow flame coming out of a busen burner?
You can't it is always the same. You only use the blue flame to heat things because the yellow flame is the safety flame and the blue flame is hotter.
Parts of a Bunsen burner?
The parts of a Bunsen burner has collar,base.air hole and barrel. Collar : Adjust size of air hole Base: Support Bunsen Burner Air hole: Allow air to enter air hole Barrel:To ensure the flame is adjusted to a suitable position
Do all parts of a flame heat equally?
No, different parts of a flame have different temperatures. The inner blue cone of a flame is typically the hottest part, while the outer yellow part is cooler. Heat distribution in a flame can vary based on factors such as fuel type and combustion efficiency.
Does combustion occur at the inner cone or the outer cone?
Of a Bunsen Burner flame? Combustion takes place in all parts of the flame.
What are the different parts of the flame?
blue is the hotest red is the coolest and orange is in the middle
Where is the hottest part of the blue flame?
The hottest part of a blue flame is typically at the tip of the inner cone. This is where complete combustion of the fuel is happening, resulting in higher temperatures compared to the outer parts of the flame.
Parts of a Bunsen burner adjusted?
There are two adjustable parts on the Bunsen burner, the knob to control gas flow and the rotation of the collar to control air flow. The gas flow control, adjusts the size of the flame by controlling how much gas is burned. While the collar controls the intensity of the flame by controlling how completely the gas burns, more complete combustion the hotter the flame. These are the two parts to adjust a Bunsen burner, I hope I have answered your question.
Describe and explain what happens to the piece of wooden splint when it is placed in the different parts of the Bunsen flame?
When a wooden splint is placed in the outer part of the Bunsen flame, it burns with a smoky flame due to incomplete combustion. When placed in the inner blue cone of the flame, it burns with a clean, non-smoky flame due to complete combustion of the wood. The inner blue cone is the hottest part of the flame, which allows for more efficient burning.
What is the thing coled on a hot air balloon that puts a flame up in to the balloon?
The piece of equipment that put the flame up into the balloon is called the 'burner' in most parts of the world. It is also sometimes called a 'heater'.
What is the code of flame sagittario?
The code for Flame Sagittario in the toy series Beyblade is "C145S." This code corresponds to the specific parts and design of the Beyblade, which include the Clear Wheel, 145 Spin Track, and Semi-Flat Performance Tip.
What is the possessive of flame?
The possessive form for the noun flame is flame's.Example: I feel the flame's heat.
4 things that you should keep constant when comparing temperature of different parts of the flame?
the thermometer usedthe amount of time you leave the thermometer in the flamehow you read the thermometerthe amount of time you leave after taking it out flame before taking the reading
Which gas welding flame is the hottest?
It's called a Neutral flame. Enough Oxygen is added to the fuel to allow almost complete combustion. The remaing fuel is combined with the surrounding air and burned. This is the best flame for most cutting and welding operations. Too little Oxygen produces a Carburizing flame. It is yellow and produces smoke. A slightly Carburizing flame is used when welding Aluminum. Too much Oxygen produces an Oxidizing flame. It begins to sound louder and the inner flame comes to a point.
What is flame safety?
A Safety Flame Is The Yellowy Orange Flame. It Is Called A Safety Flame Because You Can See It Unlike The Blue Flame
