Most likely insulated copper.
Sure. A simple generator can be made by using magnets, wires, and iron. Look inside a hand-cranked radio or flashlight to see the basic layout.
Answer why does the person who made a circuit a probably connect the wires to a penny
Fiber optic cables are flexible because they are made out of plastic that refracts light and keeps it inside the cable. The light pretty much bounces its way down the inside of the cable by passing through different layers of plastic that bend the light and keeps it moving towards one direction.
Look inside the toaster when it is toasting. The wires that go back and forth and glow red during toasting are resistors, there is one of these wire resistors on each side of each slot to provide the heat that does the toasting. The wire of these resistors is made of an alloy called Nichrome, made of Nickel and Chromium, that has relatively high resistance. Nichrome is also used in wirewound resistors in electronic devices.
A flux or fluxing agent is a source that bonds things together. When soldering wires, a flux is used as a glue that helps the wires melt and stick together. Flux is made of an adhesive and a petroleum jelly.
copper
if by "twisted pair cable" you mean a cat5 cable which is commonly used as an ethernet cable. then it´s made of copper.
The inside metal part of a cable is usually made of copper and is where, if it is an electrical cable, the electricity is conducted.
Some cable ties have metal additives, most are made with a durable, UV stablized, nylon co-polymer. Ideal use is for wires, valves, and identification.
Ethernet cables are made from cat5e cable. This cable is designed for carrying signals and is commonly used in networking. It is made up of several multicolored wires which carry the signal. This cable must have Ethernet Connectors on both end to enable to to be plugged into a router or modem.
A filament.
-wire can be taken straight to the pin and not positioned in plastic 'valley' (usually mistake made in earth wire) -wire cut when outer cable is removed -cable grip clamped onto three wires instead of cable -loose copper wires visible.
Mainly all telephone wires are made of copper with a plastic coating for insulation. Older form of telephone wire had a paper or pulp insulation over the copper wire. They are also a twisted pair cable.
Telephone cables are typically made of copper, although fiber optic cables are also used for long-distance service. Twisted-pair cable is the most common type, but there are also coaxial and optical fiber cables.
Condux is made and used for cable installation. Some examples of types of cables installed by Condux include underground broadband and telecommunications wires.
Yes, as that is basically what a hairdryer is...
Cable reels are normally made from steel but can also be made from wood, plywood or plastic. Cable reels are round, drum-shaped objects that are used to carry various types of electrical wires.