This cannot be done very accurately.
However, take enough sheets to make a stack sufficiently high to correspond with the length of the metre rule.
Divide the number of sheets by a metre. That will give you the fraction of a metre that one sheet makes.
It depends on the book
The thickness of paper is measured in 'calipers' ________ Check on the packaging of the paper for the manufacturer's specifications, if you can be confident that the specifications are accurate. You could press a known number of sheets of paper together (to extract as much air as possible), measure the stack as accurately as you can, and do the division in order to arrive at an estimated thickness of one sheet. You would divide the thickness of the pile by the number of sheets in the pile. Or you could use a micrometer to measure the thickness of one sheet. It would be interesting to use all three methods and see what you can conclude (or theorize) about differences you observe.
one page of a phonebook is measured in mm. unit thickness of a phone book is cm
Either of the first two if you wish to measure its capacity; the latter if you want to measure its length or thickness.
Grams
The easiest way to measure the thickness of a sheet of paper is to use a ruler or caliper. Simply place the paper on a flat surface, use the ruler or caliper to measure the thickness of the paper, and record the measurement in millimeters or inches.
You could use either inches or centimeters to measure the width of a sheet of paper.
9cmvmd
meter
Take about 20 pieces of similar paper, align them together and measure their total thickness. After that, divide that thickness by 20 to get the thickness of one. Or measure just one sheet, using one of the precision instruments designed for measuring thicknesses very accurately: the micrometer or the caliper (the latter of the vernier or more commonly now, digital, type).
That depends both on the size (length, width) of the paper, and on its thickness. The paper I use for printing has 75 grams per square meter; you can base your calculations on that (convert length and width to meters, and multiply by 75 to get grams per sheet). Or use some other thickness, depending on the paper you use.Please note that a gram is not technically a unit of weight, but a unit of mass.
To divide the thickness of a paper evenly, you can use a ruler or calipers to measure the total thickness. Then, use a knife or razor blade to carefully cut the paper into equal parts, ensuring each section has the desired thickness. A paper cutter or guillotine can also be used for more accuracy and precision.
The best way to measure thickness is to use an ultrasonic transducer. You use the back reflection to figure out the thickness.
You may use either the centimeter (cm) or millimeter (mm) to measure the width of a page of text (or a sheet of paper). For instance, A4 papers have a width of approximately 210mm (or 21cm), and a length of 297mm (or 29.7cm).For thickness measurements of a page of text (or a sheet of paper), you may use the units of millimeter (mm) or micrometer (μm). Generally, most paper types are between 50μm and 100μm (or 0.05mm to 0.1mm), although thicker papers (e.g. cardstock, glossy pages of photo inserts in some texts, etc) may have thickness measurements in the range of >100μm (or >0.1mm).
What measure of units would you use to measure the thickness of a phone book
There are many ways in which you could measure the thickness of a pencil. You could use a string to measure it.
It depends on the book