It is used as a thermostat.
A thermostat is a device used to control the temperature of any equipment, in this case an electric iron.
Two little strips of different types of metals are welded or brazed together. These little strips will be mounted inside the the iron near to the hot plate, held down just at one side.
An electrical contact will join the bimetallic strip into the electrical circuit of the iron. Another little flat metal plate will be mounted near the free end of the bimetallic strip. This little fixed plate will touch the free end of the bimetallic strip.
So now you turn the iron on. The irons' hot plate heats up. The bimetallic plate heats up too as it is close to the hot plate.
Ok, now is the clever bit someone once thought out. The two strips of metal heat up and expand. As the properties of the metals are different they will expand at different amounts. As the two strips are stuck together the bimetallic strip will bend.
When it bends it will eventually bend away from the fixed plate. Assuming its been installed with the bimetallic strip the right way around! because the strip will bend to the side which has the metal that expands less. When it no longer touches the plate the circuit will turn off. And hence the power is turned off to the iron.
So how come that dial makes the iron hotter or less hot? When you are twisting the dial you are actually squeezing some tension into the bimetallic strip so that it will have to get hotter before it will bend away from the contact and hence break the circuit.
Thats the idea!
It serves as a thermostatic switch to stop electricity from flowing to the heating element once the appliance reaches the desired temperature.
The bimetallic strip is made of two different metals, bonded together. The two metals have different temperature expansion coefficients, so when the bonded assembly is heated or cooled, it curves one way or the other, allowing a switch to be opened or closed.
bimetal stip is next to the contacts it make your oven,iron and air conditions unit work that is when ever the contacts touch from how high you put it and it heat up and the iron and brass bends
A bimetallic strip is often used in thermostats because it is quite simple to make and responds predictably to changes in temperature. The bimetallic strip is pretty much what it sounds like - a strip made from two metals. Inthermostatsit is common to make one side out of steel and the other out of copper - then bond them together. they are formed into a curving spiral. Different metals have different coefficients of thermal expansion so as the temperature changes, the spiral strip either curls up or uncurls as one side expands or contracts more than the other. The control isattachedto one end of the strip so that as it curls or uncurls, it rotates the control.Sometimes the control is a simple mercury switch that closes a contact whenrotatedone way and opens the contact when rotated the other. Sometimes one end is attached to a power source and the other end is connected to an electric contact, which moves as the strip curls and uncurls.You can also attach it to a pointer and have it point to temperatures on a dial.
Electric Iron by far.
They're all thermostats of on kind or another: home, car, stove, hot-water heater,
Appliances like electric iron, which need a cut off from the electric current from time to time as the appliance is heated adequately, use bimetallic strip for this.
When the temperature of the iron increases, the bimetallic strip bends upwards. This breaks the contact between the strip and the heating coil. When the temperature falls, the bimetallic strip bends down and the contact is restored.
A bimetallic strip is made out of steel and iron
The bimetallic strip is made of two different metals, bonded together. The two metals have different temperature expansion coefficients, so when the bonded assembly is heated or cooled, it curves one way or the other, allowing a switch to be opened or closed.
Iron and brass
yes, in automated iron boxes
The bimetallic strip bends.
A bimetallic strip is a strip with two metals bonded together. It can be found in thermostats
A bimetallic strip is made out of copper and steel.
A bimetallic strip is used to convert a temperature change into mechanical displacement.
Bimetallic strip
strip , spoon ,iron ,oven,n i think also fan