0
What else can I help you with?
Which gas helps the foam that fire fighters use?
In a Compressed Air Foam System (CAFS), air or another gas is compressed and introduced into the foam solution. Larger systems use a dedicated air compressor and compresses regular air from the atmosphere.Smaller systems can use any inert compressed gas such as Carbon Dioxide (CO2), Compressed Nitrogen (N2) or smaller tanks of compressed regular air.The simplest, most efficient and least expensive way of producing foam is with a portable foam eductor. These foam systems use regular hand lines and an eductuor 100 feet from the end of the nozzle. The eductor siphons foam solution from a tank or drum using the "Venturi" principal. When the foam solution reaches a standard fog nozzle, water pressure and the broken stream produced by the nozzle introduce air into the foam solution.There are other forms of nozzles that introduce water using the "Venturi" effect that are not user adjustable like a fog nozzle.The quick easy answer is regular air is used most commonly in fire fighting foam however CO2 and N2 can be used depending on the design of the system used.In a Compressed Air Foam System (CAFS), air or another gas is compressed and introduced into the foam solution. Larger systems use a dedicated air compressor and compresses regular air from the atmosphere. Smaller systems can use any inert compressed gas such as Carbon Dioxide (CO2), Compressed Nitrogen (N2) or smaller tanks of compressed regular air.The simplest, most efficient and least expensive way of producing foam is with a portable foam eductor. These foam systems use regular hand lines and an eductuor 100 feet from the end of the nozzle. The eductor siphons foam solution from a tank or drum using the "Venturi" principal. When the foam solution reaches a standard fog nozzle, water pressure and the broken stream produced by the nozzle introduce air into the foam solution.There are other forms of nozzles that introduce water using the "Venturi" effect that are not user adjustable like a fog nozzle.The quick easy answer is regular air is used most commonly in fire fighting foam however CO2 and N2 can be used depending on the design of the system used.
What is the difference between closed cell foam insulation and open cell foam insulation?
Closed-cell foam insulation differs from open cell foam insulation in the fact that closed-cell foam insulation has tiny foams cells that are closed and packed together. They are filled with gas that helps the foam rise. Open cell foam does not have this characteristic.
Does soda pop foam more in styrofoam cups plastic or glass?
Probably plastic cups, but it would depend on the comparative smoothness of the containers. the dissolved gas in soda needs a nucleation site to form a gas bubble, this can be a dirt particle or in this case the walls of the container.
Is a foam pillow a conductor or an insulator?
This depends on the type of foam. There have been made foam that actually conduct electricity. This is a choice made in the manufacturing of the foam. Most foam in mattresses and the like does not conduct electricity. Moisture however can change the mattresses conductivity drastically.
What are the advantages of foam board?
hi, the main advantage of using a foam board is that it is light and also strong.
What is Fire fighting foam?
Fire fighting foam is used to smuther fires. The foam will work as a blanket on the fire to prevent oxygen and flames from re-igniting the area. Foam is best used on oil or gas spills but my fire department uses it for anything on fire to get the job done right and fast. Fire fighting foam is used to smuther fires. The foam will work as a blanket on the fire to prevent oxygen and flames from re-igniting the area. Foam is best used on oil or gas spills but my fire department uses it for anything on fire to get the job done right and fast.
When was Fighting Fire Fighter created?
Fighting Fire Fighter was created in 1956.
What is the duration of Fighting Fire Fighter?
The duration of Fighting Fire Fighter is 1.48 hours.
What is inside foam?
Inside foam is a gas. :)
Why gas helps to make the foam that firefighters use?
AFFF or aqueous fire fighting foam is a chemical agent that is added to water usually at a rate of about 300:1 (300gal water for 1gal foam concentrate) this mixture is then mixed with the outside air as it exits the nozzle and creates a blanket of foam that suffocates the fire.
What gas is used to make foam for firefighting?
which gas helps to make the foam that firefighters use
What is the maximum number of people you can play with skirmish mode in foam fighter?
4
Where is the radar located in the appgear foam fighter screen on woozworld?
app gear
How do you be a good fighter?
You can train as a fighter in a gym then go to fighting places and be afighter as you like But I Dont
What do you need to become a MMA fighter?
You have to have training in fighting.
Which is the oldest fighting game?
Steet fighter 1987
Which gas helps make the foam that firefighter use?
well the tank that holds the foam is compressed with co2 but what actually makes the foam is the nozzle it acts as an aerator and thus making the liquid into foam ----------------------------------------- Air is the most simple example of gas used in foam fire extinguishers.
