http://en.wikipedia.org/wiki/Sheet_metal_gauge
0.1345 inches
-6 inches (negative six inches). there are 12 inches in a foot, so 6 - 12 = -6
30 millimetres is 0.03 metres. That is about the diameter of a two litre cola bottle cap. 1 and 3/16 inches.
hands, or half hands. this is approximately 4 to 6 inches.Horses are measured in hands. One hand is equal to four inches. For example, a horse may be 15.2 hh (hands) tall. There is no 15.5, it goes from 15.3 to 16.0, ect.
To make 0.2 of anything equal to 1 you need to multiply it by 5, because 5 x 2 = 10, so 5 x 0.2 = 1.0
6mm goes into one inch 4.23 times.Direct Conversion Formula6mm*1 in25.4 mm=0.2362204724in
Gage Hubbard goes by Gage Munster.
Six feet is equal to 72 inches.
Gage Wolfe goes by Wolfy.
Gage Truscott goes by Xander, and G.
Edward James Gage goes by E.J..
A foot is equal to 12 inches. Therefore 29.5 inches would be equal to 2.45 feet. This is because 12 goes into 29.5, 2.45 times.
There are 12 inches in one foot. Therefore, 36 feet is equal to 36 x 12 = 432 inches.
1 foot is equal to 12 inches. 1 inch is equal to 1/12 feet.
GAUGE , is one inch thick of steel or metal. So, take this one inch thick of steel sheet and cut it into 12 equal thickness sheets , you get a 12 gauge steel sheet. Similarly, take this one inch thick of steel sheet and cut it into 14 equal thickness sheets , you get a 14 gauge steel sheet. and so on . So, a 12 gauge steel sheet is thicker than 14 gauge , 14 is thicker than 16 , 16 is thicker than 18 and so on. Wrong!!! See my discussion on this...
There are 12 inches in a foot, and 12 into 54 goes 4.5 times, so it would be 4 and one half feet.
-6 inches (negative six inches). there are 12 inches in a foot, so 6 - 12 = -6
Hollie Steel goes by Hollie bee Steel.