0
What else can I help you with?
Convert 200lbs to psi?
The lb (Pound) is a unit of mass (sometimes called weight) and the psi (pounds per square inch) is a unit of pressure. I take it that you need to calculate the pressure of a number of pounds on a certain surface. You may find the suggested web site helpful. You can't convert pounds to pounds per square inch (psi). One is force and one is pressure. If you know the area over which the force is spread, then you can divide the force by the area and get pounds per square inch (psi).
How do you convert PSI to ATM?
Multiply psi x 0.07 to get atmospheres.
MPa to psi?
1 psi = 6.89476 kPa (rounded) 1 kPa = 0.14504 psi (rounded) 1 mPa = 1,000 kPa
What is Psi to pascal conversion?
un mega pascal a cuantos psi equivale
Converting 30.0 inches of mercury to psi?
30 inches of mercury = 14.73 psi (1 inch of mercury = 0.491 psi So, 30 x 0.491 = 14.73).
Is 200 psi of air the same as 200 psi of water?
No, 200 psi of air is not the same as 200 psi of water. This is because water is denser than air, so the pressure exerted by water at 200 psi would be greater than that of air at the same pressure.
Can a 200 psi paintball gun use a larger psi tank?
There is no paintball gun that runs on only 200 psi.
How many psi are there in 200 kpa?
200 kPa is equivalent to 29.007 psi.
What is the compression psi for 1988 kx250?
200 psi
What is 200kpa in psi?
200 kPa (kilopascals) = 29.01 psi
What is the pressure at a depth of 200 feet?
The pressure at a depth of 200 feet underwater is approximately 86.5 pounds per square inch (psi). This is because pressure increases by 0.433 psi for every foot of depth in water. So, at 200 feet deep, the pressure is 200 ft * 0.433 psi/ft = 86.5 psi.
How much psi is in 200 feet of water?
The pressure at a depth of 200 feet of water is approximately 86.6 pounds per square inch (psi). This is calculated by dividing the depth (200 feet) by the specific gravity of water (0.433) to determine the pressure in psi.
How many psi are in 200 kpa?
29.
What is the maximum pressure of a 1.250 pipe?
depends on the pipe like if its copper its rated at 300 psi 200 degree F pvc is rated at 200 psi schedule 40 if its black poly it would be 200 psi most all pipes have it on the side of the pipe ,pressure and degrees.
What is the psi in city water pressure?
Depends on the place your located on the planet as some places have as little as 8 PSI and other almost 200 PSI
What is a good psi for a air soft gun?
200 TO 400
Tire pressure 250 virago?
According to the Virago XV250R manual, up to 90 kg load, it's: 175 kPa (25 psi) front; 200 kPa (29 psi) rear. 90 kg and above: 200 kPa (29 psi) front; 225 kPa (32 psi) rear.
