0
5
What else can I help you with?
How many milimeters in 9.6 cm?
9.6 cm 96 mm
What does 259 mm round to in cm?
To convert from millimeters to centimeters, you divide by 10 since there are 10 millimeters in a centimeter. Therefore, 259 mm is equivalent to 25.9 cm. When rounding to the nearest centimeter, you look at the digit in the tenths place, which is 9 in this case. Since 9 is equal to or greater than 5, you round up to the nearest whole number, resulting in 26 cm.
What is 3.5 cm in mm?
1 cm = 10 mm → 3.5 cm = 3.5 × 10 mm = 35 mm
How do you convert 387 cm to mm?
387 cm * 10 mm/cm = 3870 mm
How many mm in 5 and a half cm?
5.5 mm is .55 in cm So 5.5 mm= .55 cm Audrey S
What is 13.27 cm to the nearest mm?
13.27 cm is equal to 132.7 mm when rounded to the nearest millimeter.
What is MM to the nearest cm?
It is 0 cm.
Round 124 mm to the nearest cm?
40
What is 64cm to the nearest mm?
64 cm
what is 3cm rounded off the nearest mm?
1 cm is equal to 10 mm, so 3 cm is equal to 30 mm
How many milimeters in 9.6 cm?
9.6 cm 96 mm
What is 3.4 cm to the nearest mm?
3.4cm is equal to 34mm.
What is 114 mm to the nearest cm?
To convert 114 mm to the nearest centimeter, we need to divide 114 by 10 because there are 10 millimeters in a centimeter. This gives us 11.4 cm. Since we are rounding to the nearest centimeter, and the decimal is 0.4, which is equal to or greater than 0.5, we round up to the nearest whole number. Therefore, 114 mm is equal to 12 cm when rounded to the nearest centimeter.
What is the maximum volume of a cylinder that can be encased into a square ended cuboid whose length is 60 mm with a volume of 96 cubic cm showing work and answer to the nearest hundredth?
Volume of cuboid = 96 cm^3 = 96000 mm^3Length of cuboid = 60mmTherefore cross-sectional area = 96000/60 = 1600 mm^2Then either the cuboid is 40 mm x 40 mm with a length of 60 mm orit is 60 mm x 60 mm square with a length of 1600/60 mm.It is possible to prove that the largest cylinder is one whose circular face [base] is parallel to the square cross-section.In the first case the cylinder has a radius 20 mm and height 60 mm => vol = 24000*pi mm^3, orthe cylinder is 30 mm * 30 mm and height 1600/60 mm => vol = 24000*pi mm^3.The question contains measurements in mm and in cm and so it is not clear what units the "nearest hundredths" refers to. Since I have done the calculations in mm, the answer is24000*pi = 75398.22 mm^3.
10 centimetres rounded to the nearest millimetres?
1 cm = 10 mm so exactly 100 mm
Where is 96mm on a tape measure?
To find 96 mm on a tape measure, first convert millimeters to centimeters, which gives you 9.6 cm. On a standard tape measure, locate the 9 cm mark and then look slightly past it to find the 6 mm increment, which is usually shown as a small line between the 9 cm and 10 cm marks. The 96 mm mark will be just before the 10 cm line, slightly to the left of the 10 cm mark.
What does 259 mm round to in cm?
To convert from millimeters to centimeters, you divide by 10 since there are 10 millimeters in a centimeter. Therefore, 259 mm is equivalent to 25.9 cm. When rounding to the nearest centimeter, you look at the digit in the tenths place, which is 9 in this case. Since 9 is equal to or greater than 5, you round up to the nearest whole number, resulting in 26 cm.
