Convex when it bends outwards, concave when it bends inwards
It is called "The Bends"
Meander
The eyeglass has a refracting effect that bends the path of light into your eye at the right angle.
what problems can occur if a highway have sharp bends
the explanation is that the bends are caused by nitrogen in the blood stream and the block up the blood way and causepain. to get rid of the bends you need to see a doctor IMMEDIATELY. TO PREVENT THE BENDS rise to the surface of the water every 15 minuets. the air will then clear you blood passage. Nitrogen in the bloodstream causes bends, which leads to blocking of the bloodstream causing pain
A concave mirror bends light inwards towards a central focal point. This type of mirror can focus light rays to create a real or virtual image, depending on the distance between the object and the mirror.
A concave surface is hollow and bends inwards.... think of it as conCAVE.... caves are hollow.A convex surface is like a bump and bends outwards... a convEX bump is on the EXterior of an object
A converging lens bends parallel rays inwards towards a focal point.
I was told to recognise a malaria mosquito lies parallel with a wall and the other mosquito's bottom sticks outwards
Eyesight = ------< = the lines are pointing to how it sees. You see things more clearly for far away things> = the lines are pointing to how it sees. You see things more clearly for close objects.Concave: ---------)(> objectConvex: ---------)< objectI hope you understand the answer. I didnt explain it too well.or you could try......concave is like a "cave"..it bends inwardsand convex is just the opposite it bends outwards....//nfjn//....concave mirror is the one which forms the inner part of the spherical mirror or its reflecting surface bulges inwards & convex is the one which bulges outwards. concave always forms real & inverted image while convex forms virtual & erect image
It bends inward, if that's what your asking. Like this: )|
the mirror bends slightly on that line to pick out your blinds spots.
Usually the two triangle pieces have different pitches. So by swapping them it makes the total triangle area different. Red triangle pitch: atan(3/8) = 20.56 deg Blue triangle pitch: atan(2/5) = 21.80 deg When the blue is on the top, the total triangle bends inwards slightly, and when its at the bottom, the total bends outwards. Thus changing the area of the triangle and making room for an empty block.
Because the light bends
When light hits a mirror, it either reflects onto another mirror, or bends and travels until it hit an opaque object.
It means that any line drawn from 2 points on the shape does not go out of the shape. This means this shape must be solid (filled in) and every interior angle must be equal or less than 180 degrees.
Mirror (uses reflection principle), transparent glass sheet (uses refraction principle),etc are the instruments which are used to bend light.