The SI unit for measuring an electric current is the ampere, which is the flow of electric charge across a surface at the rate of one coulombper second.
kilojoule (kJ) is a unit of energy. kilowatt (kW) is a unit of power, or energy per unit time. so 1 kW = 1 kJ/s s = (second)
That is called "power". The SI unit of energy is the joule, the SI unit for power is the watt, which is equal to joules/second.That is called "power". The SI unit of energy is the joule, the SI unit for power is the watt, which is equal to joules/second.That is called "power". The SI unit of energy is the joule, the SI unit for power is the watt, which is equal to joules/second.That is called "power". The SI unit of energy is the joule, the SI unit for power is the watt, which is equal to joules/second.
The period, usually denoted by T, is the length of time taken by one cycle, and is the reciprocal of the frequency f:The SI unit for period is the second.In the USA the frequency used for commercial electrical distribution is 60Hz. Therefore one cycle is the complete revolution of the current and the period is the time it takes for the cycle in seconds. T=0.016667sec
Units of current are ampere which is the flow of electric charge across a surface at the rate of one coulomb per second.The ampere is that constant currentwhich, if maintained in two straight parallel conductors of infinite length
In plumbing, a Fixture Unit (FU) is equal to one cubic foot of water per minute. A Fixture Unit is not a flow rate unit but a design factor. This is roughly 7.48 gallons per minute, or 28.3 liters per minute.
There is no answer as the units are incompatible and therefore not convertible. In plumbing, a Fixture Unit is equal to one cubic foot of water drained in an 1 1/4 pipe over one minute. A Fixture Unit is not a volume or a flow rate unit but a design factor.
A fixture unit is 1 cubic foot of water (7.48 gallons) If your using pumped drainage /soil system then for every GPM of flow rate one has to consider it as ONE FU
By the flow rate in GPM .. 1 GPM pumped discharge is considered ONE FU .. Normally a fixture unit is one cubic foot of water which is 7.48 gallons. Fixture can also be used for storm drainage such as a roof and then you have to figure 3 sq ft =1 FU and a combination system one has to use interpolation to size the drainage /waste line
A fixture is 7.48 gallons which is equal to 1 cubic foot of waterAlso a fixture unit in storm drainage is roughly 3 square feet depending on pitchTo convert sanitary /waste to storm fixture units for a combined system one has to do interpolation combining all the GPM flow expected from a 10 year frequency
One fixture unit
It is a unit rate.A unit rate.
It is one form of a unit rate.
Unit Rates ... Is the rate for one unit of a given quantity. Unit means one .
A fixture is 7.48 gallons which is equal to 1 cubic foot of waterAlso a fixture unit in storm drainage is roughly 3 square feet depending on pitchTo convert sanitary /waste to storm fixture units for a combined system one has to do interpolation combining all the GPM flow expected from a 10 year frequency
It is one of two possible forms of a unit rate.
A unit rate cannot have a remainder. A unit rate is a ration that has the unit as one and the rate has to be equal. If not, you either did a calculation mistake or the ratio is not a unit rate.