0
What is the K setting on a Scotts R8A spreader converted to on a Scotts Speedy Green spreader?
The K setting on a Scotts R8A spreader corresponds to a specific rate of application for granular materials. For a Scotts Speedy Green spreader, the equivalent setting can vary, but generally, you can use a conversion chart to find the closest match. Typically, the K setting on the R8A might translate to a setting around 4-5 on the Speedy Green, but it's always best to refer to the manufacturer's conversion guide for precise adjustments based on the material being spread.
What else can I help you with?
What should the setting be for 13-13-13 fertilizer on a Scott 3000 speedy green broadcast?
For using a Scott 3000 Speedy Green broadcast spreader with 13-13-13 fertilizer, the recommended setting is typically around 4 to 5 on the spreader. However, it's important to check the specific product label for precise instructions, as settings can vary based on the type of granules and the desired application rate. Always calibrate your spreader to ensure even distribution and avoid over-fertilization.
How do you calibrate scotts speedy green 2000 spreader?
A) Adjust the micrometer setting to 2.B) Squeeze the trigger against the handle.C) The calibration line engraved on the top of the shutoff plate should be flush with the back edge of the hopper opening.D) To adjustalignment, use a small wrench or pliers to turn the black calibration screw at the lower end of the control wire leading from the micrometer rate setting barrel.http://www.scotts.com/smg/goART2/InfoHowTo/spreader-settings-for-grass-seed-and-lawn-food/19500090/7200009(MORE)
How do you calibrate a Scotts Speedy Green 1000 spreader?
To adjust calibration, do the following:A) Adjust the micrometer setting to 11.B) Squeeze the trigger against the handle.C) The calibration line engraved on the top of the shutoff plate should be flush with the back edge of the hopper opening.D) To adjust alignment, use a small wrench or pliers to turn the black calibration screw at the lower end of the control wire leading from the micrometer rate setting barrel.http://www.scotts.com/smg/goART2/InfoHowTo/spreader-settings-for-grass-seed-and-lawn-food/19500090/7200009
Is earl gray alkaline?
speedy singh
What is the similar meaning to rapid?
prompt, fast, speedy
Scotts turf builder plus with weed controlwhat is the setting when using the speedy green 2000?
You would want to use spreader setting 3.25
Scotts Speedy Green 2000 spreader settings for 4lb per 1000 sq ft of Eagle 0.39 Granular Turf Fungicide?
setting @6
Where to buy scotts speedy green 2000 spreader?
You can purchase the Scotts Speedy Green 2000 spreader at various retailers, including home improvement stores like Home Depot and Lowe's, as well as garden centers. Online options include major e-commerce sites like Amazon and Walmart. Additionally, check the official Scotts website for potential direct purchasing options or authorized dealers.
What is the setting on a Scott's speedy green 2000 spreader for lawn seed?
set on 3.25
What are the settings for a scotts speedy green 2000 for mk minerals pelletized gypsum?
For applying MK Minerals pelletized gypsum with a Scotts Speedy Green 2000 spreader, you typically want to set the spreader to a medium setting, usually around 10-12 for even distribution. However, it's best to consult the specific product label for MK Minerals gypsum for any recommended settings. Additionally, check your spreader calibration and adjust the rate based on your lawn size and application requirements for optimal results. Always perform a small test area first to ensure proper coverage.
What setting should I use for fall feeding using a scott's speedy green 1000 spreader and 20-1-4 Naturlawn nutrient?
Set the Scott's Speedy Green 1000 spreader to the recommended setting for the 20-1-4 Naturlawn nutrient as indicated on the product packaging or by using a calibration test. Apply the fertilizer evenly over your lawn, ensuring to follow all safety and usage instructions provided.
What is the setting on a Scott's speedy green 2000 spreader for grubex?
For a Scott's Speedy Green 2000 spreader, the recommended setting for applying GrubEx is typically around 5 to 6. However, it's essential to check the specific product label for GrubEx, as application rates can vary based on the concentration and formulation. Always calibrate your spreader and adjust as needed to ensure even coverage.
What is the setting on Scott's speedy green 2000 spreader for fertilizer at 5 lbs per 1000 sq ft?
To set Scott's speedy green 2000 spreader for applying fertilizer at a rate of 5 lbs per 1,000 sq ft, refer to the spreader's calibration chart, which typically indicates the appropriate setting for different fertilizers. Generally, for a rate of 5 lbs per 1,000 sq ft, you might use a setting around 4 or 5 on the spreader, but it's essential to check the specific product instructions or the manual for exact recommendations. Always calibrate the spreader beforehand to ensure accurate application.
Are the settings on the speedy green spreader per 1000 feet?
Yes, the settings on a Speedy Green spreader are typically calibrated to apply materials over a distance of 1,000 square feet. The specific setting for your spreader will depend on the type of material you're using (like grass seed, fertilizer, or lime) and the desired application rate. Always refer to the product label and the spreader's manual for the correct settings to ensure proper distribution.
What is the setting on a speedy green 2000 for ammonium Nitrate?
The recommended setting for ammonium nitrate on a Speedy Green 2000 spreader is typically around 19 to 21. It is always a good idea to refer to the manufacturer's guidelines or consult with a professional to ensure proper application.
What is the setting on a Scott's speedy green 2000 spreader for ortho bug b gone?
For the Scott's Speedy Green 2000 spreader, the recommended setting for applying Ortho Bug B Gone is typically around 3 to 4. However, it's always best to check the product label for specific instructions, as application rates may vary based on the formulation. Additionally, calibrating your spreader based on your lawn size and the product's coverage guidelines can ensure effective application.
What is the setting on speedy green 2000 for Bayer grub killer plus?
For the Speedy Green 2000 spreader, the recommended setting for applying Bayer Grub Killer Plus is typically around 5 to 7. However, it's essential to consult the product label for the most accurate setting, as it may vary based on specific application needs and local conditions. Always calibrate the spreader before use to ensure even distribution.
